DAMAGE DETECTION IN 4-STORY STEEL BRACED F RAMES USING RESIDUAL FORCES BASED ON WAVELET TRANSFORM
- سال انتشار: 1394
- محل انتشار: هفتمین کنفرانس بین المللی زلزله شناسی و مهندسی زلزله
- کد COI اختصاصی: SEE07_292
- زبان مقاله: انگلیسی
- تعداد مشاهده: 427
نویسندگان
M.S c. Student, Kharazmi University, Tehran, Iran
Associate Professor in Structural Engineering, Kharazmi University, Tehran, Iran
Assistant Professor in Earthquake Engineering, Kharazmi University, Tehran, Iran
چکیده
Wavelet transform, which wa s first introduced in 1980, is operating on a modified basis functions and makes them a new function. Wave let analysis capability using a new method to analysis the signals and time-frequency signal processing o ffers. By replacing the wavelet network rather than rigorous analysis, accurate operation will not reduce the computational time is reduced dramatically.( Roland, 2000). Wavelet analysis is an efficient tool to detect structural damages like cracks and stiffnes s degradation (Kim and Melhem, 2004).In this study, residual forces and damage detection procedure by wavelet tran sform of residual forces were described. A four story space frame with diagonal braces with several damage states was considered. For every state of damage mass and stiffness matrices, mode shapes and natural freqquencies were evaluated. Finally dynamic responses of structure were conducted under wavelet analysis an d for all cases, damages were successfully detected.After wavelet analysis on res ponses, wavelet analysis curves of residual forces showed peak points on degree of freedoms of damaged me mbers.The damage locations, when damage occurs, are easily determined simultaneo usly by the ridges in the residual forces based on wavelet tr ansform. The degrees-of-freedom that have larg e magnitudes in residual wavelet force (RWF) are associated with the potential damage members within the structure.کلیدواژه ها
Damage detection, Resi dual force, Wavelet transform, Steel braced frame s, Earthquakeمقالات مرتبط جدید
- بهبود خواص فوتوکاتالیستی بتن خود تمیزشونده با استفاده از ترکیب اصلاح شدهنانو اکسید تیتانیوم و نانو اکسید روی
- مقایسه جداساز لرزه ای لاستیکی با هسته سربی و جداساز لرزهای پاندول اصطکاکی بر رفتارلرزهای سازه های قاب خمشی فولادی میان مرتبه دارای نامنظمی جرمی تحت اثر زلزلههای نزدیک گسل
- ارزیابی عملکرد ساختمان های نامتقارن دارای سیستم قاب خمشی بتن مسلح مجهزبه میلگردهایآلیاژ حافظه دار شکلی در برابر زلزله
- Evaluation of the behavior of concrete columns reinforced with FRP composite materialsagainst severe earthquakes
- بررسی عملکرد بتن پارچه ای، تحت بارهای ناشی از ضربه و انفجار
اطلاعات بیشتر در مورد COI
COI مخفف عبارت CIVILICA Object Identifier به معنی شناسه سیویلیکا برای اسناد است. COI کدی است که مطابق محل انتشار، به مقالات کنفرانسها و ژورنالهای داخل کشور به هنگام نمایه سازی بر روی پایگاه استنادی سیویلیکا اختصاص می یابد.
کد COI به مفهوم کد ملی اسناد نمایه شده در سیویلیکا است و کدی یکتا و ثابت است و به همین دلیل همواره قابلیت استناد و پیگیری دارد.