Numerical Analysis of Multi-Directional Forging of AISI 52100 Steel
- سال انتشار: 1398
- محل انتشار: شانزدهمین همایش ملی و پنجمین کنفرانس بین المللی مهندسی ساخت و تولید
- کد COI اختصاصی: ICME16_001
- زبان مقاله: انگلیسی
- تعداد مشاهده: 402
نویسندگان
PhD student, Mechanical Engineering Department, University of Birjand, Birjand, Iran
Associate Professor, Mechanical Engineering Department, University of Birjand, Birjand, Iran
چکیده
Severe Plastic Deformation (SPD) methods are used to achieve fine-grain microstructures. Mechanical properties are highly dependent to the microstructure of the specimen. Higher strength and hardness could be achieved by a fine microstructure. Multi-directional forging is a new method of severe plastic deformation. In the present study, DEFORM commercial software was used to investigate the hot multi-directional forging of AISI 52100 steel. Stress, strain, temperature, and dynamic recrystallization were investigated as the process variables. The specimen was subjected to forging in three passes where in each pass the forging direction was perpendicular to the previous forging direction. The maximum effective stress and strain were 176 MPa and 2.72, respectively. The results show that there is a temperature rise during the process which is corresponding to the plastic deformation. The initial and final temperatures were 800 and 838 ºC, respectively. The full dynamic recrystallization also occurred in the whole volume of the specimen after the third pass. The well-known Avrami model was used to predict kinetics of dynamic recrystallization.کلیدواژه ها
SPD-FEM-Multi directional forging-AISI 52100 steel.مقالات مرتبط جدید
اطلاعات بیشتر در مورد COI
COI مخفف عبارت CIVILICA Object Identifier به معنی شناسه سیویلیکا برای اسناد است. COI کدی است که مطابق محل انتشار، به مقالات کنفرانسها و ژورنالهای داخل کشور به هنگام نمایه سازی بر روی پایگاه استنادی سیویلیکا اختصاص می یابد.
کد COI به مفهوم کد ملی اسناد نمایه شده در سیویلیکا است و کدی یکتا و ثابت است و به همین دلیل همواره قابلیت استناد و پیگیری دارد.