Detection and discrimination of symmetric and asymmetric defects by using ultrasonic guided waves
- سال انتشار: 1397
- محل انتشار: پنجمین کنفرانس بین‌المللی آزمون‌های غیرمخرب ایران
- کد COI اختصاصی: ICTINDT05_016
- زبان مقاله: انگلیسی
- تعداد مشاهده: 591
نویسندگان
MSc studentc, Faculty of Mechanical Engineering, K. N. Toosi University of Technology,
Professor, Faculty of Mechanical Engineering, K. N. Toosi University of Technology,
MSc studentc, Faculty of Mechanical Engineering, K. N. Toosi University of Technology,
Research Associate, Faculty of Mechanical Engineering K. N. Toosi University of Technology,
چکیده
Several methods are currently being used for nondestructive evaluation of pipelines. In the last few years, ultra-sonic guided waves have received much attention as a tool for inspection of oil and gas pipelines. This is due to the capability of these waves in propagating over long distances with little energy loss. In this paper, the possi-bility of detection of pipe defects, such as grooves and holes, is investigated using an array of angle-beam trans-ducers. Identification of guided wave modes is done by means of a 2-D FFT analysis. The analysis demonstrates that the asymmetric excitation leads to generation of longitudinal L(0,2) mode in addition to the undesirable flexural modes that make the interpretation of results difficult. In order to eliminate the undesirable flexural modes and to increase the amplitude of the longitudinal L(0,2) mode, the pipes were excited by axisymmetric guided waves. The results showed that the axisymmetric discontinuities, e.g. axisymmetric grooves, can be dis-tinguished from asymmetric defects, e.g. a hole, by checking the mode conversions that take place in each case.کلیدواژه ها
Ultrasonic guided waves; Longitudinal L(0,2) mode; Mode conversion; axisymmetric excitation.مقالات مرتبط جدید
- Non-destructive assessment of the egg quality
- Nondestructive Testing and Investigative Analysis of Rupture Stresses in Automotive Timing Belts made from CR Material Comprised of Different Number of Tensile Members
- Simulation and Testing for Tearing Occurrence in Selected Automotive Timing Belts made from Different Materials via FEM
- Detection and Sizing Fatigue Cracks in Cylindrical Metallic Structures Using a Circular-Trapezoidal ACFM Probe
- Design and construction of a welding connection crack detection robot utilizing image processing
اطلاعات بیشتر در مورد COI
COI مخفف عبارت CIVILICA Object Identifier به معنی شناسه سیویلیکا برای اسناد است. COI کدی است که مطابق محل انتشار، به مقالات کنفرانسها و ژورنالهای داخل کشور به هنگام نمایه سازی بر روی پایگاه استنادی سیویلیکا اختصاص می یابد.
کد COI به مفهوم کد ملی اسناد نمایه شده در سیویلیکا است و کدی یکتا و ثابت است و به همین دلیل همواره قابلیت استناد و پیگیری دارد.