Ultra-trace determination of thallium (I) in water using TiO2 nanoparticles prior to its quantitation by ICP-MS
- سال انتشار: 1397
- محل انتشار: بیستمین کنگره شیمی ایران
- کد COI اختصاصی: IRANCC20_079
- زبان مقاله: انگلیسی
- تعداد مشاهده: 338
نویسندگان
Department of Chemistry, Faculty of Science, Shahrekord University, Shahrekord, Iran
Department of Chemistry, Faculty of Science, Ferdowsi University of Mashhad, Mashhad, Iran
Department of Chemistry, Faculty of Science, Ferdowsi University of Mashhad, Mashhad, Iran
Department of Chemistry, Faculty of Science, University Putra Malaysia, Selangor, Malaysia
چکیده
Nowadays heavy metals such as thallium have received considerable attention owing to their effects in the pollution of the environment [1]. A new method has been developed for the determination of trace amounts of Tl(I) from aqueous solution based on simultaneous sorption and preconcentration with TiO2 nanoparticles as sorbent prior to its determination by Inductively coupled plasma mass spectrometry (ICP-MS). In this research we use self-made PTFE microcolumn packed with TiO2 nanoparticles with high specific surface area were prepared using sonochemical synthesis method at high frequency, low intensity and relatively low temperature (75˚C)[2]. The retained metal ions on the microcolumn were eluted with small amounts of a suitable eluent solvent. The optimum experimental parameters for preconcentration of Tl(I), such as pH, volume and flow rate of sample solution, eluent and interfering ions, have been investigated. Under the optimal conditions, the linear range, detection limit and precision (R.S.D., n=5) for Tl (I) were (35 -720 ng L−1 ), 5.0 ng L−1 and 2.3 % respectively. The adsorption capacity of TiO2 nanoparticles for Tl(I) was found to be 25 mg g−1. The method has been also applied for determination of trace of this element in some environmental water samples and standard reference material with satisfactory results.کلیدواژه ها
مقالات مرتبط جدید
- نقش قراردادهای هوشمند و حقوقی در بهینه سازی فرآیندهای خرید، نصب و نگهداری سیستم های فیلتراسیون در صنایع پتروشیمی
- نقش فیلترهای غشایی در صنایع نفت و گاز: اصول بازرسی و ارزیابی عملکرد سیستم های فیلتراسیون
- شبیه سازی سیالات الکتروفیلتر و داکتینگ
- سنتز و ساخت غشاهای پلی سولفون و پلی اتر سولفون با خواص و آبدوستی کنترل شده برای کاربرد در فناوری های جداسازی غشایی
- تولید عایق نسوز از پسماند تصفیه آب پالایشگاه گاز: تحولی در مدیریت پسماند و توسعه صنعتی پایدار
اطلاعات بیشتر در مورد COI
COI مخفف عبارت CIVILICA Object Identifier به معنی شناسه سیویلیکا برای اسناد است. COI کدی است که مطابق محل انتشار، به مقالات کنفرانسها و ژورنالهای داخل کشور به هنگام نمایه سازی بر روی پایگاه استنادی سیویلیکا اختصاص می یابد.
کد COI به مفهوم کد ملی اسناد نمایه شده در سیویلیکا است و کدی یکتا و ثابت است و به همین دلیل همواره قابلیت استناد و پیگیری دارد.