Design of an S-Band Ultra-Low-Noise Amplifier with Frequency Band Switching Capability
- سال انتشار: 1396
- محل انتشار: مجله نوآوری های مهندسی برق و کامپیوتر، دوره: 5، شماره: 1
- کد COI اختصاصی: JR_JECEI-5-1_003
- زبان مقاله: انگلیسی
- تعداد مشاهده: 435
نویسندگان
Department of Electrical Engineering, Damavand Branch, Islamic Azad University, Damavand, Iran.
Department of Electrical Engineering, Damavand Branch, Islamic Azad University, Damavand, Iran.
چکیده
In this paper, an ultra-low-noise amplifier with frequency band switching capability is designed, simulated and fabricated. The two frequency ranges of this amplifier consist of the 2.4 to 2.5 GHz and 3.1 GHz to 3.15 GHz frequency bands. The designed amplifier has a noise figure of less than 1dB, a minimum gain of 23 dB and a VSWR of less than 2 in the whole frequency band. The design process starts with increasing the stability factor in the source through manipulating the inductor placement technique. Then the input and output matching circuits for the first frequency band are designed. This process is completed by utilizing two similar stages placed successively in order to achieve the desired gain level. Since no degradation of the noise figure is observed and acceptable values are also obtained for other parameters, switching the elements in the output matching circuit can be a good idea for avoiding the use of a similar circuit for the second frequency band. The optimum secondary values for the mentioned elements are obtained through the analyses performed using the ADS software. For changing the values of the mentioned elements two MOSFETs are used for adding capacitance and inductance to the matching circuit. In the next step, the designed amplifier is finalized and optimized after adding a suitable bias circuit to it. Moreover, The designed amplifier is fabricated and a good agreement between the measurement, analysis, and simulation results is observed.کلیدواژه ها
Ultra-low-noise amplifier,Stability,Frequency band switching,Noise figure,VSWR,مقالات مرتبط جدید
- سودآوری مشتریان در خردهفروشی قطعات یدکی ماشین آلات راهسازی با رویکرد یادگیری ماشین
- ارائه روشی کارآمد جهت شناسایی کودکان نیازمند به پیوند مغز استخوان با استفاده از ترکیب طبقه بند ماشین بردار پشتیبان و الگوریتم بهینه سازی فاخته
- استخراج بهینه پارامترهای تاثیر گذار الگوریتم بهینه سازی بوفالوی آفریقایی با هدف استخراج ویژگی های مهم به منظور افزایش کارایی طبقه بندی داده ها
- ارائه روشی کارآمد برای بهبود عملکرد الگوریتم بهینه سازی کلاغ سیاه به منظور افزایش صحت خوشه بندی داده ها
- استفاده از الگوریتم باور بیزین در لایه کاملا متصل شبکه عصبی کانولوشن با هدف افزایش دقت تشخیص تصاویر
اطلاعات بیشتر در مورد COI
COI مخفف عبارت CIVILICA Object Identifier به معنی شناسه سیویلیکا برای اسناد است. COI کدی است که مطابق محل انتشار، به مقالات کنفرانسها و ژورنالهای داخل کشور به هنگام نمایه سازی بر روی پایگاه استنادی سیویلیکا اختصاص می یابد.
کد COI به مفهوم کد ملی اسناد نمایه شده در سیویلیکا است و کدی یکتا و ثابت است و به همین دلیل همواره قابلیت استناد و پیگیری دارد.