Influence of Impregnation Ratio on the Properties of Activated Carbon Prepared via ZnCl2 Activation

سال انتشار: 1388
محل انتشار: ششمین کنگره بین المللی مهندسی شیمی
کد COI اختصاصی: ICHEC06_595
زبان مقاله: انگلیسی
تعداد مشاهده: 2659

نویسندگان

Chemical Engineering Department, Sahand University of Technology, P.O.Box ۵۱۳۳۵-۱۹۹۶, Sahand New Town, Tabriz, Iran.

Environmental Engineering Research Center (EERC), Sahand University of Technology, P.O.Box ۵۱۳۳۵-۱۹۹۶, Sahand New Town, Tabriz, Iran.

Esmaeil Fatehifar

Environmental Engineering Research Center (EERC), Sahand University of Technology, P.O.Box ۵۱۳۳۵-۱۹۹۶, Sahand New Town, Tabriz, Iran.

Nader Rahemi

Reactor and Catalysis Research Center (RCRC), Sahand University of Technology, P.O.Box ۵۱۳۳۵-۱۹۹۶, Sahand New Town, Tabriz, Iran.

چکیده

In this study, an activated carbon with high surface area was prepared from walnut shell by chemical activation using ZnCl2. Impregnation ratios of activating agent to dry precursor (wt/wt) were selected in the range of 0.5–2.0. The influences of impregnation ratio on the characterization of the activated carbon were investigated by SEM (scanning electron microscopy), FTIR (transmittance Fourier infrared spectroscopy) and XRD (X-ray diffraction) analysis. The SEM analysis shows there is a good and successful pore development in the activated carbon obtained with increasingimpregnation ratios. X-ray diffraction patterns showed broad peaks, that suggesting either that structure is amorphous or that the particles are really too small particles or too low concentration of adsorbed material to diffract. The surface areas of the activated carbons increased with increasing impregnation ratios and the maximum value of the BET surface area can reach 2643 m2/g at impregnation ratio 2:1. The FTIR analysis showed that at high impregnation ratios the formation of aromatic rings was favored, while the formation of acidic surface groups was favored at lower impregnation ratios. Efficiency of activated carbon production has shown an optimum impregnation ratio of 2:1.

کلیدواژه ها

Activated carbon, Walnut shell, ZnCl2, Impregnation, Adsorbent

مقالات مرتبط جدید

اطلاعات بیشتر در مورد COI

COI مخفف عبارت CIVILICA Object Identifier به معنی شناسه سیویلیکا برای اسناد است. COI کدی است که مطابق محل انتشار، به مقالات کنفرانسها و ژورنالهای داخل کشور به هنگام نمایه سازی بر روی پایگاه استنادی سیویلیکا اختصاص می یابد.

کد COI به مفهوم کد ملی اسناد نمایه شده در سیویلیکا است و کدی یکتا و ثابت است و به همین دلیل همواره قابلیت استناد و پیگیری دارد.