Experimental Study on Engineered Cementitious Composite
- سال انتشار: 1396
- محل انتشار: دومین کنفرانس ملی پژوهش های کاربردی در مهندسی عمران(مهندسی سازه و مدیریت ساخت)
- کد COI اختصاصی: SECM02_423
- زبان مقاله: انگلیسی
- تعداد مشاهده: 665
نویسندگان
Professor, International Institute of Earthquake Engineering and Seismology, Tehran, Iran
Ph.D. Candidate, International Institute of Earthquake Engineering and Seismology, Tehran, Iran
Lecturer, Persian Gulf University, Boushehr, Iran
چکیده
Engineered Cementitious Composite (ECC) is a kind of high-performance fiber-reinforced cementitious composite materials (HPFRCCs) reinforced with short fibers and characterized by tight multiple cracking. These characteristics of ECC make it applicable to increase the capacity and the ductility of structural elements so that structural design is economic and sustainable. This paper presents an extended evaluation of Engineered Cementitious Composites (ECC) for the use in the strengthening of masonry infilled reinforced concrete frames. ECC is a mixture of cement, fly ash, water, sand, quartz powder and poly-vinyl alcohol fibers with a better quality of tensile strain rather than common ECC. The fine sand and quartz powder used in this study as filler were instead of the typically used sand to improve ECC behavior. Also, to show the effect of fly ash on ECC properties, five different mixtures were considered with various fly ash ratios. Different mixtures of ECC using fine aggregates produced in Iran were selected to find out how the aggregates and fly ash would affect ECC performance. The results show that the optimized mixture has the best characteristics including tensile strength and strain. Also, the best values of tensile strength and tensile strain are 3.5 MPa and 6% respectively.کلیدواژه ها
Engineered Cementitious Composites, Optimization, Experimental Study, Retrofitمقالات مرتبط جدید
- A Fuzzy Gait Phase Detection for Rehabilitation of Hemiplegic Patients with a HipExoskeleton Robot
- استفاده از فناوری کنترل عددی در رسم و نقاشی دو بعدی با استفاده از نازل رنگ پاش
- طراحی ، ساخت و کالیبراسیون میکرو پمپ سرنگی برای کاربردهای میکروفلوئیدیک
- تاثیر چسبندگی بین لایه های قطعات ساخته شده با پرینتر سه بعدی در شبیه سازی شکست خستگی
- Jerk-limited spatial PH trajectory generation for high-speed robotics application
اطلاعات بیشتر در مورد COI
COI مخفف عبارت CIVILICA Object Identifier به معنی شناسه سیویلیکا برای اسناد است. COI کدی است که مطابق محل انتشار، به مقالات کنفرانسها و ژورنالهای داخل کشور به هنگام نمایه سازی بر روی پایگاه استنادی سیویلیکا اختصاص می یابد.
کد COI به مفهوم کد ملی اسناد نمایه شده در سیویلیکا است و کدی یکتا و ثابت است و به همین دلیل همواره قابلیت استناد و پیگیری دارد.