Simulation and Investigation of Mechanical and Geometrical Properties of St/CP-Titanium Bimetal Sheet during the Single Point Incremental Forming Process
- سال انتشار: 1396
- محل انتشار: مجله شکل دهی مواد، دوره: 5، شماره: 1
- کد COI اختصاصی: JR_IJMF-5-1_001
- زبان مقاله: انگلیسی
- تعداد مشاهده: 414
نویسندگان
Faculty of Mechanical Engineering, University of Kashan, Kashan, Iran.
Faculty of Mechanical Engineering, University of Kashan, Kashan, Iran.
Faculty of Mechanical Engineering, University of Kashan, Kashan, Iran.
چکیده
In this study, the incremental forming of explosively welded low carbon steel-commercially pure titanium bilayer sheet has been experimentally and numerically investigated. For this purpose, at first a finite element based analysis was proposed to predict the forming force and thickness distribution to form this material by such process, which showed good agreement with the experimental results. Then, to investigate the effect of vertical step down (ΔZ) parameter on the properties of the workpiece, mechanical tests and microstructural studies were performed on the formed specimens. The results showed that by increasing the vertical step down (ΔZ), hardness and tensile properties of the specimens increased but the thickness reduction in the wall of the pyramidal specimens increased and also the surface quality decreased. In addition, microstructural studies showed that by increasing the vertical step down from 0.1 to 0.3, the grain structure transformed from an equiaxed state to a fibrous state and led to the formation of texture in the microstructure, to which mechanical properties improvements can be attributed. Therefore, if the surface quality of the inside wall of the specimen is not important, with an increase in the amount of ΔZ besides reducing the process time, the mechanical properties of the specimen will be improved.کلیدواژه ها
Incremental Forming, Explosive-welded, Bimetals, low carbon steel/CP Titaniumمقالات مرتبط جدید
اطلاعات بیشتر در مورد COI
COI مخفف عبارت CIVILICA Object Identifier به معنی شناسه سیویلیکا برای اسناد است. COI کدی است که مطابق محل انتشار، به مقالات کنفرانسها و ژورنالهای داخل کشور به هنگام نمایه سازی بر روی پایگاه استنادی سیویلیکا اختصاص می یابد.
کد COI به مفهوم کد ملی اسناد نمایه شده در سیویلیکا است و کدی یکتا و ثابت است و به همین دلیل همواره قابلیت استناد و پیگیری دارد.