DEFORMATION BEHAVOR OFTWP STEELDURING SMPLE SHEAREXTRUSION (SSE)
- سال انتشار: 1390
- محل انتشار: سومین کنفرانس بین المللی مواد فوق ریزدانه و نانوساختار
- کد COI اختصاصی: UFGNSM03_020
- زبان مقاله: انگلیسی
- تعداد مشاهده: 420
نویسندگان
M.Sc. student, Department of Materials Science and Engineering, School of Engineering, Shiraz University, Shiraz, Iran
Assistant Professor, Department of Materials Science and Engineering, Faculty of Engineering, Shahid Chamran University, Ahvaz, Iran
Associate Professor, Department of Materials Science and Engineering, School of Engineering, Shiraz University, Shiraz, Iran
چکیده
In the present study, an Fe-22Mn-3Si-Al TWIP steel is processed through simple shear extrusion (SSE) as a severe plastic deformation method. Dies with two maximum distortion angles of 30 (SSE-30) and 45 (SSE-45) are designed and constructed. The deformation behavior at different locations from the entrance to the exit of the deformation channel is investigated. The dislocation density and the crystallite size at the selected positions are also determined by the X-ray diffraction using the modified Williamson-Hall method. Results show that the hardness reaches to its maximum at the middle of both SSE-30 and SSE-45 channels (by a factor of about 3.3, and 4.1, respectively) compared to the annealed state. The hardness decreases slightly at the second half of the deformation channel. A similar trend is observed for dislocation density from the entrance to the exit channel. One pass of SSE-30 and SSE-45 leads to the crystallite sizes of about 710 nm and 500 nm, respectively.کلیدواژه ها
Severe plastic deformation, Simple shear extrusion, Deformation behavior, Dislocation densityمقالات مرتبط جدید
اطلاعات بیشتر در مورد COI
COI مخفف عبارت CIVILICA Object Identifier به معنی شناسه سیویلیکا برای اسناد است. COI کدی است که مطابق محل انتشار، به مقالات کنفرانسها و ژورنالهای داخل کشور به هنگام نمایه سازی بر روی پایگاه استنادی سیویلیکا اختصاص می یابد.
کد COI به مفهوم کد ملی اسناد نمایه شده در سیویلیکا است و کدی یکتا و ثابت است و به همین دلیل همواره قابلیت استناد و پیگیری دارد.