Optimum FSP Parameters Determination to Fabricate Wear resistant AZ31-MWCNTs Surface Composite
- سال انتشار: 1395
- محل انتشار: دهمین همایش مشترک و پنجمین کنفرانس بین المللی انجمن مهندسی مواد و متالورژی و انجمن علمی ریخته گری ایران
- کد COI اختصاصی: IMES10_584
- زبان مقاله: انگلیسی
- تعداد مشاهده: 624
نویسندگان
Shiraz University, Department of Materials Science and Engineering, School of Engineering, Shiraz, Iran
Shiraz University, Metal Forming, Mechanical Properties, Superalloys, Polymers
Shiraz University, Metal Forming, Mechanical Properties, Creep, Materials Design
چکیده
In the current study an AZ31/MWCNTs surface composite was fabricated through friction stir processing on a L36 Taguchi design to investigate the importance of the processing parametersand predict the optimum parameters. The response properties were coefficient of friction (COF) and specific wear rate as a representative for resistance to the wear. The COF in all FSPed composite samples decreased up to 0.2 from about 0.6 in as received sample. The FSPed noncompositesamples also showed lower COF than the as received sample (up to about 0.3). Resistance to wear in both FSPed and composite sample were higher than that of the as receivedsamples. The most important parameters influencing the COF and resistance to wear were theCNT amount and the pass number. The wear mechanism was changed from abrasive wear in as received sample to the delamination and adhesive wear in the FSPed and composite samples, respectively.کلیدواژه ها
AZ31/MWCNT Surface Composite, Friction Stir Processing, Coefficient of Friction,Specific Wear Rate, Abrasive Wearمقالات مرتبط جدید
- Evaluating the Impact of Metal Microparticle Material and Size on theShear Strength of Aluminum/Adhesive/Aluminum Sheets
- بررسی انحلال کانی کالکوپیریت از کنسانتره مجتمع مس سرچشمه با استفاده از آکوارجیا آلی
- Molecular dynamic Simulation of ternary Cu۴۶Zr۴۶Al۸ bulkmetallic glass
- رویکردی نوین در بازیافت ضایعات صنعتی آلیاژ تیتانیوم با استفاده از آلیاژسازی مکانیکی
- شستشوی هیدرومتالورژی غبارهای کورههای ذوب جهت تعیین غبار بهینه لیچ مس
اطلاعات بیشتر در مورد COI
COI مخفف عبارت CIVILICA Object Identifier به معنی شناسه سیویلیکا برای اسناد است. COI کدی است که مطابق محل انتشار، به مقالات کنفرانسها و ژورنالهای داخل کشور به هنگام نمایه سازی بر روی پایگاه استنادی سیویلیکا اختصاص می یابد.
کد COI به مفهوم کد ملی اسناد نمایه شده در سیویلیکا است و کدی یکتا و ثابت است و به همین دلیل همواره قابلیت استناد و پیگیری دارد.