Experimental investigation of the effects of torsion pitch in simultaneous tension-torsion deformation
- سال انتشار: 1394
- محل انتشار: کنفرانس دو سالانه بین المللی مکانیک جامدات تجربی
- کد COI اختصاصی: WMECH03_152
- زبان مقاله: انگلیسی
- تعداد مشاهده: 534
نویسندگان
PhD student, School of Mechanical Engineering, Iran University of Science and Technology, Tehran, Narmak, Iran
Professor, School of Mechanical Engineering, Iran University of Science and Technology, Tehran, Narmak, Iran
Associate Professor, Institute of Materials Science and Welding, Graz University of Technology, Graz 8010, Austria
Professor, Institute of Materials Science and Welding, Graz University of Technology, Graz 8010, Austria
چکیده
Commercial pure Al wires are deformed to different torsion pitch by a novel method combining the tension and torsion deformation. An equal channel angular die and a lathe machine are used to apply simultaneous tension-torsion deformation to the initial wires. The amount of induced plastic strain is calculated experimentally after one pass of the deformation. The microstructure of the processed samples is investigated by optical microscopy. The results show that the average grain size of the annealed wire is decreased to 50μm and less than 15μm at the wire center and edge from an initial size of 120μm. The results also revealed a gradient distribution of grain refinement due to torsion deformation. The micro-hardness measurement indicates an increase in hardness of all processed samples. The hardness of annealed sample is increased from 30 HV to 62 HV in the wire center and 73 HV at the wire edge for the sample with 4.8mm torsion pitch. This novel method shows a significant applicability for continuous grain refinement of wires.کلیدواژه ها
Al wires, torsion pitch, properties, tension-torsionمقالات مرتبط جدید
- ساخت پوشش آبگریز مبتنی بر نانوذرات سیلیکا مقاوم در برابر خوردگی
- Thermodynamic study of a trigeneration system based on solar energy
- Thermodynamic comparison of different solar organic Rankine cycles
- Energy and exergy analysis of a trigeneration system based on geothermal energy
- Thermodynamic comparison of the geothermal -based power plants
اطلاعات بیشتر در مورد COI
COI مخفف عبارت CIVILICA Object Identifier به معنی شناسه سیویلیکا برای اسناد است. COI کدی است که مطابق محل انتشار، به مقالات کنفرانسها و ژورنالهای داخل کشور به هنگام نمایه سازی بر روی پایگاه استنادی سیویلیکا اختصاص می یابد.
کد COI به مفهوم کد ملی اسناد نمایه شده در سیویلیکا است و کدی یکتا و ثابت است و به همین دلیل همواره قابلیت استناد و پیگیری دارد.