Car Seat Design to improve Rear Seat Strength during Seat Belt Anchorage test According to ECE R14

  • سال انتشار: 1394
  • محل انتشار: کنفرانس دو سالانه بین المللی مکانیک جامدات تجربی
  • کد COI اختصاصی: WMECH03_083
  • زبان مقاله: انگلیسی
  • تعداد مشاهده: 609
دانلود فایل این مقاله

نویسندگان

M Barza

Project Manager, Engineering Research Laboratory, Research and Development Center, Saipa Azin Company, Tehran, 13865-348, Iran

M Vkhajehzadeh

Assistant Professor, Department of Mechanical Engineering, Amirkabir University of Technology, Tehran, 424 Hafez Ave, Tehran, Iran, 15875-4413

M Beheshti

Project Manager, Engineering Research Laboratory, Research and Development Center, Saipa Azin Company, Tehran, 13865-348, Iran

چکیده

The correct modeling and simulation of car seat components during the safety tests is essential for seat improvement process. There are different safety Standards which may be applied to automotive seats. These safety tests guarantee the proper function of the seat system and also ensures sufficient strength of all anchorage points. One of the severe safety tests is seat belt anchorage test. This test is done according ECE R14. According to this standard, loads are applied slowly and are sustained over a long period of time, so one can assume a quasi-static test. During these tests, high forces are applied to the seat belts over loading devices. Seat’s components and belt anchorages have to resist these loads without any damages. In this paper, using LS Dyna, a finite element model has been developed to simulate the loading condition. Then, the results of the FEM model have been verified by experimental tests. Finally, the validated model has been used to optimize car seat design in term of components’ thickness and strength.

کلیدواژه ها

Strength analysis, optimization, finite element modeling, rear seat belt strength, LS-Dyna

مقالات مرتبط جدید

اطلاعات بیشتر در مورد COI

COI مخفف عبارت CIVILICA Object Identifier به معنی شناسه سیویلیکا برای اسناد است. COI کدی است که مطابق محل انتشار، به مقالات کنفرانسها و ژورنالهای داخل کشور به هنگام نمایه سازی بر روی پایگاه استنادی سیویلیکا اختصاص می یابد.

کد COI به مفهوم کد ملی اسناد نمایه شده در سیویلیکا است و کدی یکتا و ثابت است و به همین دلیل همواره قابلیت استناد و پیگیری دارد.