On the microstructure evolution and mechanical properties of the A390 alloy tubes produced via horizontal centrifugal casting

  • سال انتشار: 1395
  • محل انتشار: سومین کنفرانس بین المللی علوم و مهندسی
  • کد COI اختصاصی: ICESCON03_202
  • زبان مقاله: انگلیسی
  • تعداد مشاهده: 846
دانلود فایل این مقاله

نویسندگان

Masoud Mohammadi Rahvard

P.hd student of School of Materials Science and Engineering, Iran University of Science and Technology, IUST, Narmak ,Tehran, Iran. Corresponding author

Morteza Tamizifar

Associate professor of School of Materials Science and Engineering, Iran University of Science and Technology, IUST, Tehran, Iran

Seyed Mohammad Ali Boutorabi

professor of School of Materiasl Science and Engineering, Iran University of Science and Technology, IUST, Narmak, Tehran, Iran.

چکیده

Three kinds of functionally graded tube using A390 alloy at various rotation speeds 400,700 and 1000 rpm with thickness of 2cm were produced by horizontal centrifugal casting, and their microstructure and mechanical properties were investigated and compared. Characteristics and distribution of the primary particles were assessed by the optical microscopy (OM), scanning electron microscopy (SEM), and image analyzer software. The hardness and pin-on-disk wear tests along the thickness of samples were performed to investigate the variation in the mechanical properties corresponding to the variation in microstructure. Also, the worn surfaces of the material were examined by scanning electron microscopy (SEM) to study the dominant wear regime. Significant enrichment zones of primary Si particles were observed in the external and internal zone of the casting in the radial2direction of the centrifugal caster, but; in the middle layer, a few reinforcement particles were observed. Furthermore; it is found that, with increasing of the rotation speed, the thickness and volume fraction of particles in the outer layer increase. Corresponding increases in surface micro hardness as well as smaller wear volume loss in the outer layer in comparison with other layer were observed

کلیدواژه ها

A390 Alloy, functionally graded material, centrifugal casting, various speed

مقالات مرتبط جدید

اطلاعات بیشتر در مورد COI

COI مخفف عبارت CIVILICA Object Identifier به معنی شناسه سیویلیکا برای اسناد است. COI کدی است که مطابق محل انتشار، به مقالات کنفرانسها و ژورنالهای داخل کشور به هنگام نمایه سازی بر روی پایگاه استنادی سیویلیکا اختصاص می یابد.

کد COI به مفهوم کد ملی اسناد نمایه شده در سیویلیکا است و کدی یکتا و ثابت است و به همین دلیل همواره قابلیت استناد و پیگیری دارد.