Development of a New Finite Element Model for EEVC WG17 Legform Impactor
- سال انتشار: 1387
- محل انتشار: شانزدهمین کنفرانس سالانه بین المللی مهندسی مکانیک
- کد COI اختصاصی: ISME16_797
- زبان مقاله: انگلیسی
- تعداد مشاهده: 3061
نویسندگان
Assistant professor Department of Automotive Engineering University of Science and Technology
M.S Student Department of Automotive Engineering University of Science and Technology
Assistant professor Faculty of Marine Technology Amirkabir University of Technology
چکیده
Development, calibration and validation of a threedimensional finite element model of the Legform impactor for pedestrian crash with bumper are presented. In orde r to prevent lower extremity injuries to a pedestrian when struck by a car, it is important to elucidate the loadi ngs from car front structures on the l wer extremities and the injury mechanism caused by these loadings. An impact test procedure with a legform addressing lower limb injuries in car pedestrian accidents has been proposed by EEVC/WG17. Lower limb injury is becoming an increasingly important concern in vehicle safety for both occupants and pedestrians. A finite element model of the human lower limb was developed using Ls- dyna. Total mass of legform impactor is 13.4 kg .The technical specifications, including the mass of femur and tibia, the location of the centre of gravity, moment of inertia of the impactors, are determined. The results show that the technical specifications of the legform impactor fulfilled the EEVC-WG17 requirements.کلیدواژه ها
Legform impactor, Pedestrian safety, Finite element model, Knee jointمقالات مرتبط جدید
- نگاهی به نقش اقتصاد سیاسی ایران در مدیریت مصرف انرژی
- مقایسه روشهای نورتابی شیمیایی رادیکال *CH و *OH در استخراجپاسخ دینامیکی شعله جریان متقابل
- مطالعه عددی اثر تحریک جریان ورودی بر عملکرد یک انژکتور هممحور برشی تحت شرایط گذربحرانی
- مطالعه ساختار شعله متان هیدروژن در مشعل پیچشی سیدنی با استفاده از مدل احتراقی حجمی
- مطالعه تجربی اثر احتراق جریان چرخشی غیر پیش مخلوط بر پایداری، شدت تابش نور و دینامیک شعله پروپان - اکسیژن/هوا
اطلاعات بیشتر در مورد COI
COI مخفف عبارت CIVILICA Object Identifier به معنی شناسه سیویلیکا برای اسناد است. COI کدی است که مطابق محل انتشار، به مقالات کنفرانسها و ژورنالهای داخل کشور به هنگام نمایه سازی بر روی پایگاه استنادی سیویلیکا اختصاص می یابد.
کد COI به مفهوم کد ملی اسناد نمایه شده در سیویلیکا است و کدی یکتا و ثابت است و به همین دلیل همواره قابلیت استناد و پیگیری دارد.