Investigation of Clamp Geometry Effects on the FractureCharacterization by Modified Arcan Fixture
- سال انتشار: 1392
- محل انتشار: کنفرانس دو سالانه بین المللی مکانیک جامدات تجربی
- کد COI اختصاصی: WMECH02_134
- زبان مقاله: انگلیسی
- تعداد مشاهده: 889
نویسندگان
Postgraduate Student
Associate Professor
PhD Student Mechanical Engineering Department, Sahand University of Technology, Tabriz, Iran, P.O.Box: ۵۱۳۳۵-۱۹۹۶
چکیده
This study presents investigation of clamp geometry effects on the fracture characterization of the materials by using modified Arcan fixture. In most applications fracture occurs in mode-I (tensile), mode-II (shear), or the combination of shear and tensile modes. In modified Arcan fixture by varying the loading angle, from 0o to 90o, pure mode-I, pure mode-II and mixed mode data can be obtained. The test fixture and sample were modelled with ABAQUS/CAE and the contour integral method was used at various loading angles to calculate the non-dimensional stress intensity factors. To study the effect of mixed mode loading conditions, the fracture parameters were studied at loading intervals of 3o. By investigating the values of non-dimensional stress intensity factures, a non- uniformity is shown in the values of mode-II non-dimensional stress intensity factures close to pure mode-II loading. By investigating the influence of clamp geometry it was resulted that this non-uniformity was due to the geometry of modified Arcan fixture. This study also investigated the influence of deformation of fixture on the values of fracture parameters. Results showed that by reforming the geometry of modified Arcan fixture the non-uniformity was omitted.کلیدواژه ها
Fracture mechanics, Mixed-mode, Modified Arcan fixture, Finite-element analysisمقالات مرتبط جدید
- Analytical determination of flexural rigidity of thin-walled pultruded composite I-beams
- Matrix-Dominated Damage Process in CFRP Composite Laminates underFlexural Loading Condition
- Indentation Size Scale Effect on Mechanical Properties of Cold SprayCoating
- Determination of Forming Limit Diagrams for Tailor Welded Blanks
- Control of dynamic building façade: design, analysis and experiments
اطلاعات بیشتر در مورد COI
COI مخفف عبارت CIVILICA Object Identifier به معنی شناسه سیویلیکا برای اسناد است. COI کدی است که مطابق محل انتشار، به مقالات کنفرانسها و ژورنالهای داخل کشور به هنگام نمایه سازی بر روی پایگاه استنادی سیویلیکا اختصاص می یابد.
کد COI به مفهوم کد ملی اسناد نمایه شده در سیویلیکا است و کدی یکتا و ثابت است و به همین دلیل همواره قابلیت استناد و پیگیری دارد.