EXPERIMENTAL STUDYING THE EFFECT OF AIR-INJECTION ON THE COMBUSTION BY AN AIR-CELL AND EMISSIONS CHARACTRESTICS IN A DI ENGINE
- سال انتشار: 1390
- محل انتشار: چهارمین کنفرانس احتراق ایران
- کد COI اختصاصی: CCI04_055
- زبان مقاله: انگلیسی
- تعداد مشاهده: 1106
نویسندگان
Corresponding author. MSc Student of Mechanical Engineering, Address: Mechanical Engineering Department, Technical Education Faculty, Urmia University, Urmia, West Azerbaijan,Iran
Associate Professor. Present address: Iran, West Azerbaijan ,Urmia, , Urmia University, Dept. Of Engineering.
Associate Professor. Present address: Iran, West Azerbaijan ,Urmia, , Urmia University, Dept. Of Engineering.
MSc Student of Mechanical Engineering, Address: Mechanical Engineering Department,Technical Education Faculty, Urmia University, Urmia, West Azerbaijan, Iran
چکیده
This research uses an experimental method to explore the effect of air-injection during the late combustion period produced by an air-cell on the combustion and emissions in directinjection diesel engine. In this work which is done at Motorsazan (Iran tractor manufacturing company), the engine considered is a 135TI test engine which was modeled with an air-cellincluded as part of the piston geometry. Pollutant emission and combustion characteristicsmeasurements were performed according to the (ECE-R96) for baseline and modified engines. The comparing of the results shows that the emissions of the modified DI diesel engine are improved than the baseline engine while bsfc is remaining almost the same. In this study, a moreimprovement in particulates was obtained, while reducing of NOx by the mean of 5.4 percent, by the using of air-cells for injecting air into the combustion chamber to augment mixing and thereby increasing the rate of soot oxidation.کلیدواژه ها
diesel engine air-cell emission combustionمقالات مرتبط جدید
- توسعه مبدل حرارتی داخلی ( IHX ) از طریق تغییر فرآیند ساخت و تولید لوله های گاز کولر در صنعت خودروسازی
- بهبودعملکرد سیکل تبرید تراکمی با تغییر فرآیند ساخت مبدل SLHX از آرایش مماسی به هم مرکز
- بررسی تاثیر لایه میانی روی در اتصال غیر مشابه آلیاژ پایه منیزیم AZ۳۱ و آلومینیوم ۶۰۶۱ به روش جوشکاری اصطکاکی اغتشاشی نقطهای
- بررسی تجربی سوراخکاری کامپوزیتهای پلیمری: مقایسه جوت و شیشه
- سیستم هوشمند پایش وضعیت بلبرینگ با استفاده از طیفنگاره صوتی جهت طبقهبندی و تشخیص خطای بلبرینگ ها
اطلاعات بیشتر در مورد COI
COI مخفف عبارت CIVILICA Object Identifier به معنی شناسه سیویلیکا برای اسناد است. COI کدی است که مطابق محل انتشار، به مقالات کنفرانسها و ژورنالهای داخل کشور به هنگام نمایه سازی بر روی پایگاه استنادی سیویلیکا اختصاص می یابد.
کد COI به مفهوم کد ملی اسناد نمایه شده در سیویلیکا است و کدی یکتا و ثابت است و به همین دلیل همواره قابلیت استناد و پیگیری دارد.