An Improved Direct Torque Control of Brushless DC Motors using Twelve Voltage Space Vectors
- سال انتشار: 1390
- محل انتشار: سومین کنفرانس بین المللی الکترونیک قدرت و سیستمهای درایو
- کد COI اختصاصی: PEDSTC03_025
- زبان مقاله: انگلیسی
- تعداد مشاهده: 1337
نویسندگان
Amirkabir University of Technology
Amirkabir University of Technology
Amirkabir University of Technology
Amirkabir University of Technology
چکیده
In direct torque control (DTC) of brushless dc (BLDC) motors the same voltage vector is applied during the whole sample period, and maybe some sequential sample intervals, which results highripple in the stator flux linkage and torque. One proposed solution to minimize these weak points is achieved by increasing the number of candidate voltage vectors that can be selected in each sector. This is realized by multilevel inverters. In low voltageapplications, use of multi switches in each phase causes cost increase. In addition, some of the voltage vectors may not be used depending on the selected technique.In this paper, use of two and three phase conduction modes at the same time is proposed. Based on the proposed scheme, there are twelve voltage vectors andso twelve sectors in the voltage vector plane. Each sector corresponds to one vector. In addition to torqueripple reduction, especially at commutation instants, due to employing the full conduction mode at some intervals, more capacity of the brushless dc motor willbe used. This paper contains the principles of two phase and full conduction modes, combination of these two modes and builds up the proposed scheme, respectively. The validity of the proposed combined switching mode is verified through the simulation results.کلیدواژه ها
brushless dc motor drives; direct torque control; two phase conduction; three phase conduction;combined conduction mode;مقالات مرتبط جدید
- مدلسازی و شبیه سازی جبران ساز سری سنکرون استاتیکی توزیع برای حل چالش های شبکه توزیع بر پایه الگوریتم بهینه سازی گرگ خاکستری
- Adaptive Control Strategies for Fast Charging of EVs with Battery Degradation Mitigation
- شناسایی مانع با استفاده از دید استریو برای خودروهای بدون سرنشین
- Multi-Gbest Decomposition for Many-Objective Optimization
- ترکیب منابع انرژی پیزوالکتریک و ترموالکتریک به منظور افزایش کارایی سیستم های برداشت انرژی
اطلاعات بیشتر در مورد COI
COI مخفف عبارت CIVILICA Object Identifier به معنی شناسه سیویلیکا برای اسناد است. COI کدی است که مطابق محل انتشار، به مقالات کنفرانسها و ژورنالهای داخل کشور به هنگام نمایه سازی بر روی پایگاه استنادی سیویلیکا اختصاص می یابد.
کد COI به مفهوم کد ملی اسناد نمایه شده در سیویلیکا است و کدی یکتا و ثابت است و به همین دلیل همواره قابلیت استناد و پیگیری دارد.