Numerical Study Of Vortex Flows In A Centrifugal Pump In The Case Of Higher Flow Rate Than The Optimal Flow Rate
- سال انتشار: 1403
- محل انتشار: سیزدهمین کنفرانس بین المللی فناوری های نوآورانه در زمینه علوم، مهندسی و تکنولوژی
- کد COI اختصاصی: TETSCONF13_026
- زبان مقاله: انگلیسی
- تعداد مشاهده: 250
نویسندگان
Department of Mechanical Engineering, University College of Nabi Akram, Iran
Department of Mechanical Engineering, University of Tabriz, Iran*Corresponding Author
Department of Mechanical Engineering, University College of Nabi Akram, Iran
چکیده
In a centrifugal pump, the vortex fluid flows between the blades of the pump impeller are one of the causes of pump hydraulic losses. It seems that the more the number of impeller blades of a centrifugal pump, the vortex fluid flows passing through the channel between the two blades of the impeller. In this article, two propellers are considered for a centrifugal pump, the first impeller has three blades and the second impeller has six blades. The outer diameter of the propeller and the inner diameter of the propeller and the speed of the water flow at the entrance of both the above propellers are the same. Using OpenFOAM computational fluid dynamics software, the flow of water inside each of the above-mentioned two propellers has been studied in the flow mode lower than the optimal flow rate. The results of the computer simulation show that in the case of the pump impeller with three blades, a large vortex flow is formed near the outlet of the passage between the two successive blades. Whereas in the case of the pump impeller with six blade, a smaller vortex flow is formed on the pressure side of one of the blades.کلیدواژه ها
Centrifugal pump, impeller, blades, vortex flow, optimal flowمقالات مرتبط جدید
- تحلیل چالشها و راهکارهای تقویت ارتباط دانشگاه و صنعت: با تمرکز بر حلقههای مفقوده
- بازخوانی نقش دانشگاه و صنعت در توسعه ملی: از موانع تا راهکارها
- نشانگر تشخیصی جدید در ژن C-myc به عنوان کیت غیر تهاجمی تشخیص سرطان دهان
- برنامه ریزی منابع تجدید پذیر با درنظر گرفتن برنامه ریزی توسعه انتقال و تولید منابع توان راکتیو
- برنامه ریزی همزمان توسعه انتقال و منابع تولید توان راکتیو با استفاده از یک الگوریتم تکاملی بهبود یافته
اطلاعات بیشتر در مورد COI
COI مخفف عبارت CIVILICA Object Identifier به معنی شناسه سیویلیکا برای اسناد است. COI کدی است که مطابق محل انتشار، به مقالات کنفرانسها و ژورنالهای داخل کشور به هنگام نمایه سازی بر روی پایگاه استنادی سیویلیکا اختصاص می یابد.
کد COI به مفهوم کد ملی اسناد نمایه شده در سیویلیکا است و کدی یکتا و ثابت است و به همین دلیل همواره قابلیت استناد و پیگیری دارد.