Friction Stir welding of AA7075 by Adding SiC nano particles at the Interface
- سال انتشار: 1391
- محل انتشار: دومین کنفرانس بین المللی آلومینیوم
- کد COI اختصاصی: IIAC02_079
- زبان مقاله: انگلیسی
- تعداد مشاهده: 1612
نویسندگان
Faculty of Mining and Materials Engineering, Amirkabir University of Technology (AUT), Hafez Ave., Tehran, Iran
Faculty of Mining and Materials Engineering, Amirkabir University of Technology (AUT), Hafez Ave., Tehran, Iran
School of Mechanical Engineering, College of Engineering, University of Tehran, Tehran, Iran
چکیده
In this study, Friction stir welding (FSW) process employed to fabricate aluminium matrix composite (AMC) along the joint line. For this purpose, Sic particles ranging from 45-65nm inserted tightly in a symmetrical pre-formed groove between the abutting plates. The material under study was AA7075-O.Microstructural and mechanical properties of weldments were investigated as a function of travelling and rotational speeds. Decreasing travelling speed and Increasing rotational speed resulted in higher tensile strength and ductility of the weldments. Optical microscopy (OM) examination revealed that stirred zone (SZ) grains were finer than those of thermomechanically affected zone (TMAZ), heat affected zone (HAZ), and base metal (BM) due to dynamic recrystallization induced by plastic deformation and frictional heat during FSW. SiC particles acted as heterogeneous nucleation site during dynamic recrystallization of Al grains and prevented the recrystallized grain from further growth. The latter effect is known as pinning effect. Furthermore, banding structure consisting partilcefree and particle-rich was observed in the NZ. It’s found that 1250 rpm and 50 mm/min are the optimum welding speeds. Scanning electron microscopy (SEM) depicted agglomeration of SiC particles clearly.کلیدواژه ها
Friction stir welding, Sic nano-powder, AA7075, Compositeمقالات مرتبط جدید
اطلاعات بیشتر در مورد COI
COI مخفف عبارت CIVILICA Object Identifier به معنی شناسه سیویلیکا برای اسناد است. COI کدی است که مطابق محل انتشار، به مقالات کنفرانسها و ژورنالهای داخل کشور به هنگام نمایه سازی بر روی پایگاه استنادی سیویلیکا اختصاص می یابد.
کد COI به مفهوم کد ملی اسناد نمایه شده در سیویلیکا است و کدی یکتا و ثابت است و به همین دلیل همواره قابلیت استناد و پیگیری دارد.