Thermite Welding of Aluminum Conductor by Addition of Copper
- سال انتشار: 1391
- محل انتشار: دومین کنفرانس بین المللی آلومینیوم
- کد COI اختصاصی: IIAC02_063
- زبان مقاله: انگلیسی
- تعداد مشاهده: 1198
نویسندگان
University of Tabriz, Materials Engineering Department
University of Tabriz, Materials Engineering Department
University of Tabriz, Materials Engineering Department
چکیده
Aluminum conductors welding is an important issue in electricity transportation industry. Thermite welding is a good method to weld such parts. In some conditions, electrical arc welding or friction stir welding could not be used to weld these conductors due to environmental conditions, lack of welding tools, etc. In these cases, thermite welding could be used as an appropriate method. In this work, two aluminum conductors (with 9.3 mm diameter and 12.5 cm length) were welded by the use of thermite welding. These conductors were made of commercially pure aluminum (Al> 99%) to enhance the weld strength, different contents of copper (0.73- 2.4 wt%) were added to the thermite powder and mechanical properties, electrical resistance and microstructural changes were studied by the use of hardness testing, resistance measurements and optical metallography, respectively. The results show that increasing the percentage of copper causes the reduction of electrical conductivity and increases the strength and hardness of the welded joint. Furthermore, grain size decreases due to Cu presence in the weld.کلیدواژه ها
Thermite welding, aluminum, copper, mechanical strength, electrical conductivityمقالات مرتبط جدید
- مطالعه تجربی و مقایسه رفتار مکانیکی گلار۱/۲ و گلار ۲/۳ تحت بار خمشی
- Investigation effect of process parameters of Al۶۰۶۱ composites fabricated by FSP on microstructure, mechanical properties with minitab and designexpert
- بررسی خواص جوشمان های سطحی دو لایه بر روی ورق فولادی دو لایه
- مکانیزم ها در دیگ های بخار
- Numerical Study on the cavitation patterns in a Francis turbine
اطلاعات بیشتر در مورد COI
COI مخفف عبارت CIVILICA Object Identifier به معنی شناسه سیویلیکا برای اسناد است. COI کدی است که مطابق محل انتشار، به مقالات کنفرانسها و ژورنالهای داخل کشور به هنگام نمایه سازی بر روی پایگاه استنادی سیویلیکا اختصاص می یابد.
کد COI به مفهوم کد ملی اسناد نمایه شده در سیویلیکا است و کدی یکتا و ثابت است و به همین دلیل همواره قابلیت استناد و پیگیری دارد.