Vibration Analysis of a Variable Thickness Kirchhoff rectangular Plate Using Modified Wave Method
- سال انتشار: 1391
- محل انتشار: دومین کنفرانس بین المللی آکوستیک و ارتعاشات
- کد COI اختصاصی: ISAV02_164
- زبان مقاله: انگلیسی
- تعداد مشاهده: 1590
نویسندگان
Mechanical engineering, University of Tehrn, Tehran, Iran.
چکیده
In this contribution, based on Kirchhoff plate theory, natural frequencies and mode shapes of an arbitrary variable thickness rectangular plate in one direction with two opposite edgessimply supported is investigated by employing a semi-analytical method referred to as modified wave method (MWM). The plate is partitioned into several continues segment withconstant thickness, for which there exists exact analytical solution. By using continuity condition,the waves entering a segment in positive and negative directions are calculated in terms of waves that entered in first segment. By satisfying boundary conditions, characteristicequations are achieved and all natural frequencies and mode shapes are computed. For validatingthe proposed technique, the results are compared with the investigations available on the technical literature. The results reveal that the introduced technique is highly accuratewhich is applicable for plates with two opposite edges simply supported, and two other edge can have any combination of simply (S) and clamped (C) boundary conditions, while also the frequencies of plate are obtained by lower numbers of segments, because all segments are solved analytical.کلیدواژه ها
vibration; variable thickness plate; semi-analytical; modified wave methodمقالات مرتبط جدید
- بررسی اثرات انتشار امواج لرزه ای در سازههای قاب خمشی دسته شده و هگزاگرید دارای پارامتر سختی یکسان
- شناسایی آزمایشگاهی ترک طولی تراورس بتنی پیش تنیده با استفاده از تست مودال تجربی
- Investigation of Transmission Loss and Absorptioncoefficient of the PU Composite Panels forConstruction Application
- Comprehensive Analysis of the Effect of Polyisobutyl-ene (PIB) Molecular Weight on Damping Properties of Butyl-Based Constrained Layer Damping Systems
- REVIEWING THE OBERST BEAM METHOD AND ITS AP-PLICATION IN CONSTRAINED LAYER DAMPING FOR AUTOMOTIVE NOISE, VIBRATION, AND HARSHNESS (NVH) CONTROL
اطلاعات بیشتر در مورد COI
COI مخفف عبارت CIVILICA Object Identifier به معنی شناسه سیویلیکا برای اسناد است. COI کدی است که مطابق محل انتشار، به مقالات کنفرانسها و ژورنالهای داخل کشور به هنگام نمایه سازی بر روی پایگاه استنادی سیویلیکا اختصاص می یابد.
کد COI به مفهوم کد ملی اسناد نمایه شده در سیویلیکا است و کدی یکتا و ثابت است و به همین دلیل همواره قابلیت استناد و پیگیری دارد.