Effect of SiC nanoparticles on dispersion of carbon nanotubes and grain refinement in Cu/MWCNTs composites
- سال انتشار: 1391
- محل انتشار: اولین همایش بین المللی و ششمین همایش مشترک انجمن مهندسی متالورژی ایران
- کد COI اختصاصی: IMES06_677
- زبان مقاله: انگلیسی
- تعداد مشاهده: 1454
نویسندگان
Ceramic Department, Materials and Energy Research Center (MERC), P.O. Box ۱۴۱۵۵-۴۷۷۷, Tehran, Iran.
Department of Materials Science and Engineering, Sharif University of Technology, P.O. Box ۱۱۳۶۵-۹۴۶۶, Tehran,
Ceramic Department, Materials and Energy Research Center (MERC), P.O. Box ۱۴۱۵۵-۴۷۷۷, Tehran, Iran.
چکیده
Small amount of SiC nanoparticles ( 2 vol.%) was added to the mixture of Cu/CNT as an active mixing agent for dispersing of the CNTs in Cu powder, and also as an agent to increase the matrix grains stabilityduring consolidation. The powders were mechanically ball milled for 3h in an optimized condition todisperse reinforcements in copper powder and to retain CNTs structure during processing. The composites with different volume fraction of CNTs were consolidated by hot pressing (HP) method.Microstructures of the powders and bulk materials were studied using scanning electron microscope(SEM), X-ray diffraction (XRD), Raman spectroscopy and High resolution transmission electron microscope (HR-TEM). The results showed relatively intact and uniform distribution of CNTs and fine matrix grain size due to addition of SiC nanoparticles. Raman characterization confirmed the retention ofCNTs structure in the composites during mechanical milling and HP. It can be concluded that dualreinforcement dispersion method can be used to strengthen the composite by improvement of the CNTs dispersion and grain refinementکلیدواژه ها
Copper, Metal matrix composite, SiC, Carbon nanotubes, Grain refinementمقالات مرتبط جدید
- مطالعه تجربی و مقایسه رفتار مکانیکی گلار۱/۲ و گلار ۲/۳ تحت بار خمشی
- Investigation effect of process parameters of Al۶۰۶۱ composites fabricated by FSP on microstructure, mechanical properties with minitab and designexpert
- بررسی خواص جوشمان های سطحی دو لایه بر روی ورق فولادی دو لایه
- مکانیزم ها در دیگ های بخار
- Numerical Study on the cavitation patterns in a Francis turbine
اطلاعات بیشتر در مورد COI
COI مخفف عبارت CIVILICA Object Identifier به معنی شناسه سیویلیکا برای اسناد است. COI کدی است که مطابق محل انتشار، به مقالات کنفرانسها و ژورنالهای داخل کشور به هنگام نمایه سازی بر روی پایگاه استنادی سیویلیکا اختصاص می یابد.
کد COI به مفهوم کد ملی اسناد نمایه شده در سیویلیکا است و کدی یکتا و ثابت است و به همین دلیل همواره قابلیت استناد و پیگیری دارد.