The influence of new generation of polymer fibers (Macro fibers) on concrete flexural toughness

  • سال انتشار: 1391
  • محل انتشار: نهمین کنگره بین الملی مهندسی عمران
  • کد COI اختصاصی: ICCE09_449
  • زبان مقاله: انگلیسی
  • تعداد مشاهده: 1910
دانلود فایل این مقاله

نویسندگان

AliReza Bagheri

Assistant professor, Khaje Nasir Toosi university of technology

Hamed Zanganeh

Lecturer, Khaje Nasir Toosi university of technology

Mostafa Shahmoradi

M.Sc. structural engineering, Khaje Nasir Toosi university of technology

Ali Tadayon

چکیده

A major weakness of concrete is its brittleness, especially in tension. Using fibers has been an effective way for improving concrete toughness. The use of fiber reinforced concrete (FRC) is thus increasing and the most widely used has been steel fibers. The common polymeric micro fibers do not have a significant effect on concrete toughness. This is mainly due to the restriction on the volume fraction of these fibers that can be used before severing difficulties with regards to their dispersion and concrete workabilityoccurs. In recent years, new generation of polymer fibers (Macro fibers) mainly based on polypropylene with modified performance have became available to the construction industry. With increased diameter and length, possibility of using higher volume fraction of these macro fibers is possible. Furthermore the enhanced mechanical properties of macro polymer fibers have provided a potential for significantimprovement of concrete toughness. In this research the influence of different fibers including steel, and polymeric micro fiber and macro fibers, on concrete mechanical properties including first crack strength and flexural toughness has been investigated. Results show that macro fibers improve the toughness of concrete for in excess of that by performance of macro fibers in improving toughness of concrete is considerably lower than steel fibers, however at higher deformation levels the macro fibers have same performance as steel fibers

کلیدواژه ها

Macro polymer fibers, Micro polymer fibers, Steel fibers, flexural toughness

مقالات مرتبط جدید

اطلاعات بیشتر در مورد COI

COI مخفف عبارت CIVILICA Object Identifier به معنی شناسه سیویلیکا برای اسناد است. COI کدی است که مطابق محل انتشار، به مقالات کنفرانسها و ژورنالهای داخل کشور به هنگام نمایه سازی بر روی پایگاه استنادی سیویلیکا اختصاص می یابد.

کد COI به مفهوم کد ملی اسناد نمایه شده در سیویلیکا است و کدی یکتا و ثابت است و به همین دلیل همواره قابلیت استناد و پیگیری دارد.