Study the effects of reinforcing elements on the flank wear when milling Al۵۲۰-MMC
- سال انتشار: 1401
- محل انتشار: هشتمین کنفرانس بین المللی مواد کامپوزیتی: ساخت، خواص و کاربرد
- کد COI اختصاصی: COMPOSIT08_057
- زبان مقاله: انگلیسی
- تعداد مشاهده: 203
نویسندگان
Department of Mechanical Engineering, Iran University of Science and Technology, Tehran ۱۳۱۱۴-۱۶۸۴۶
Assistant Professor, Department of Mechanical Engineering, Iran University of Science and Technology, Tehran ۱۳۱۱۴-۱۶۸۴۶
Associate Professor, Department of Mechanical Engineering, Iran University of Science and Technology, Tehran ۱۳۱۱۴-۱۶۸۴۶
چکیده
Amongst commercial composites, special attention is paid to metal matrix composites (MMCs). According tothe literature, the fabrication process of such materials with additive particles is still the subject of additional studies.Furthermore, limited studies were reported on the effects of reinforcing elements on the machinability of Al-MMC.Therefore, the effects of reinforcing elements, including silicon carbide (SiC), bismuth (Bi), and tin (Sn) particles on the toolflank wear under lubricated and dry milling of Al۵۲۰-MMC are presented in this work. According to experimentalobservations, the use of Bi and Sn in the matrix structure of the work part led to an almost ۵۰% reduction in the toolflank wear when machining Al۵۲۰ + ۱۰% SiC. Despite the reinforcing elements used, higher flank wear was observedunder dry machining than those recorded in lubricated mode.کلیدواژه ها
Metal matrix composites (MMCs), Al-MMC, Machinability, Tool flank wear, Reinforcing elementsمقالات مرتبط جدید
- ساخت و بررسی خواص مکانیکی کامپوزیت چند لایه Al / Cu / Ti / Cu / Al با استفاده از فرآیند اتصال نوردی تجمعی (ARB)
- بررسی تاثیر افزودن نیترید آلومینیوم و گرافن بر خواص مکانیکی و مشخصات ریز ساختاری کامپوزیت های بر پایه دی بوراید تیتانیم تولید شده به روش تف جوشی پالسمای جرقه ای-شبیه سازی فرایند برش متعامد با استفاده از ابزار برشی بر پایه ۲TiB
- بررسی خواص مکانیکی کامپوزیت های تقویت شده با الیاف شیشه و جوت
- بررسی تجربی مقاومت به ضربه چندالیهای فلزی-الیافی شیشه وینیل استر تحت تاثیر خوردگی
- بهبود خواص مکانیکی و حرارتی رزین پلی استر غیراشباع تقویت شده با سیلیکا
اطلاعات بیشتر در مورد COI
COI مخفف عبارت CIVILICA Object Identifier به معنی شناسه سیویلیکا برای اسناد است. COI کدی است که مطابق محل انتشار، به مقالات کنفرانسها و ژورنالهای داخل کشور به هنگام نمایه سازی بر روی پایگاه استنادی سیویلیکا اختصاص می یابد.
کد COI به مفهوم کد ملی اسناد نمایه شده در سیویلیکا است و کدی یکتا و ثابت است و به همین دلیل همواره قابلیت استناد و پیگیری دارد.