A New Topology For The Three-Phase to Three- Phase Cycloconverters

  • سال انتشار: 1389
  • محل انتشار: دومین کنفرانس بین المللی الکترونیک قدرت و سیستم های درایو
  • کد COI اختصاصی: PEDSTC02_082
  • زبان مقاله: انگلیسی
  • تعداد مشاهده: 1658
دانلود فایل این مقاله

نویسندگان

ali aghabeigi heris

Faculty of Electrical and Computer Engineering University of Tabriz Tabriz, Iran.

meisam sadeghi

Faculty of Electrical and Computer Engineering University of Tabriz Tabriz, Iran.

ebrahim babaei

Faculty of Electrical and Computer Engineering University of Tabriz Tabriz, Iran.

چکیده

This paper proposes a new topology for threephase to three-phase cycloconverters. In the proposed topology, in order to generate the desired output voltage, the main states of switches are decreased in comparison with conventional topologies of three-phase to three-phase cycloconverters which can improve the performance of the cycloconverter. Increasing of the maximum output/input voltage transfer ratio of converter up to 1.5 is one of the main advantages of the proposed cycloconverter. In addition, there is no restriction for generation of output frequency consequently; the proposed cycloconverter can be applied as both step-up and step down converters. The control strategy of cycloconverter is based on pulse width modulation (PWM) method. Using PWM based control strategy, the injected harmonics will be produced around the switching frequency and its multiple coefficients and the size of filters will be decreased. Also, a feedback of output voltage is used in the control strategy of the proposed converter to improve its performance. The proposed cycloconverter is simulated using PSCAD/EMTDC software and simulation results for both balanced and unbalanced load are presented to validate the effectiveness and performances of the new proposed topology.

کلیدواژه ها

Cycloconverter, Forced commutated, Matrix converter, Three-phase to Three-phase converter, Bidirectional switch

مقالات مرتبط جدید

اطلاعات بیشتر در مورد COI

COI مخفف عبارت CIVILICA Object Identifier به معنی شناسه سیویلیکا برای اسناد است. COI کدی است که مطابق محل انتشار، به مقالات کنفرانسها و ژورنالهای داخل کشور به هنگام نمایه سازی بر روی پایگاه استنادی سیویلیکا اختصاص می یابد.

کد COI به مفهوم کد ملی اسناد نمایه شده در سیویلیکا است و کدی یکتا و ثابت است و به همین دلیل همواره قابلیت استناد و پیگیری دارد.