A numerical investigation on the roll damping coefficient of a typical airship based on the computational fluid dynamics

  • سال انتشار: 1400
  • محل انتشار: نوزدهمین کنفرانس بین المللی انجمن هوافضای ایران
  • کد COI اختصاصی: AEROSPACE19_231
  • زبان مقاله: انگلیسی
  • تعداد مشاهده: 267
دانلود فایل این مقاله

نویسندگان

Alireza Akbari

M.Sc. student, Department of Aerospace Engineering Amirkabir University of Technology

Sahar Noori

Assistant Professor, Department of Aerospace Engineering Amirkabir University of Technology

Peiman Sepahvand

Teacher Assistant, Department of Aerospace Engineering Amirkabir University of Technology

چکیده

The main application of dynamic coefficients is in the flight path simulation and autopilot design of flying objects. This paper reveals a general process for calculating the roll damping coefficient of a typical airship. The process presented in this article has a step-by-step path that can be used to calculate the roll dumping coefficient of all projectiles and flying objects. The method applied in this paper is fully numerical and the dynamic coefficient will be extracted from the Fluent software using the moving reference frame (MRF) techniques. In this process, first, the roll moment coefficient is extracted from the fluent using the moving reference frame technique, and then the roll damping coefficient will be calculated using some relations presented in this paper. At the beginning of the present work, the general process of calculating dynamic coefficients is discussed. This process is then used to calculate the dynamic coefficient of a typical geometry.The results of the present work and the process of calculating this coefficient, which is fully discussed in this article, can be used to calculate this coefficient in other flying objects with similar geometry. In order to validate the present article, the results of the present work are validated with the results of another article.Acceptable agreement of the results of the present work with references, proves the correctness of the process presented in this paper for calculating this dynamic coefficient.

کلیدواژه ها

Dynamic coefficients - MRF - roll damping coefficient - CFD

مقالات مرتبط جدید

اطلاعات بیشتر در مورد COI

COI مخفف عبارت CIVILICA Object Identifier به معنی شناسه سیویلیکا برای اسناد است. COI کدی است که مطابق محل انتشار، به مقالات کنفرانسها و ژورنالهای داخل کشور به هنگام نمایه سازی بر روی پایگاه استنادی سیویلیکا اختصاص می یابد.

کد COI به مفهوم کد ملی اسناد نمایه شده در سیویلیکا است و کدی یکتا و ثابت است و به همین دلیل همواره قابلیت استناد و پیگیری دارد.