Effects of FDM Process Parameters on Strength of Steel PLA Printed Parts Using Taguchi Method
- سال انتشار: 1399
- محل انتشار: هفدهمین همایش ملی و ششمین کنفرانس بین المللی مهندسی ساخت و تولید
- کد COI اختصاصی: ICME17_113
- زبان مقاله: انگلیسی
- تعداد مشاهده: 327
نویسندگان
Ph.D. student, Mechanical Engineering Department, University of Birjand, Birjand, Iran
MSc, Mechanical Engineering Department, University of Birjand, Birjand, Iran
Associate Professor, Mechanical Engineering Department, University of Birjand, Birjand, Iran
چکیده
Additive manufacturing is a new technology for the rapid manufacturing of prototypes or final products. The Fused Deposition Modeling (FDM) method is a variant of Additive manufacturing technology. This paper investigates the effect of FDM process parameters including nozzle temperature, infill pattern, and print speed on the ultimate tensile strength and maximum elongation of a part made of Steel PLA filament. Taguchi design of experiment method is used to optimally minimize the number of experiments. Nozzle temperature in three levels of ۲۱۵, ۲۲۵, and ۲۳۵ œC, three infill patterns of the grid, rectilinear and triangular, and three print speeds of ۸۰۰, ۱۲۰۰, and ۱۸۰۰ mm/s. The results show that the only significant parameter on the ultimate tensile strength is the infill pattern. It is also observed that the only significant parameter on the maximum elongation percentage is the nozzle temperature. The best condition is obtained with a nozzle temperature of ۲۳۵ degrees, a triangular infill pattern, and a printing speed of ۱۲۰۰ mm/s.کلیدواژه ها
Fused Deposition Modelling - Steel PLA Filament – Infill Pattern - Ultimate Tensile Strength - Nozzle Temperature.مقالات مرتبط جدید
- مدیریت انرژی در یک ریزشبکه در حضور منابع تجدیدپذیر و ذخیره ساز باتری
- تجزیه وتحلیل انرژی و اگزرژی برای سیستم ژنراتور ترموالکتریک اگزوز خودرو و مقایسه عملکرد پیکربندی سیستم ساده و سیستم دارای باله های صفحه ای
- کارشناسی حوادث و مدیریت زنجیره بحران در زمانبندی پروژه های ساخت و ساز
- یک روش جدید از مدیریت شهری و حقوق شهروندی
- مدیریت بحران و کارشناسی حوادث برای کارگران در حوزه مدیریت شهری
اطلاعات بیشتر در مورد COI
COI مخفف عبارت CIVILICA Object Identifier به معنی شناسه سیویلیکا برای اسناد است. COI کدی است که مطابق محل انتشار، به مقالات کنفرانسها و ژورنالهای داخل کشور به هنگام نمایه سازی بر روی پایگاه استنادی سیویلیکا اختصاص می یابد.
کد COI به مفهوم کد ملی اسناد نمایه شده در سیویلیکا است و کدی یکتا و ثابت است و به همین دلیل همواره قابلیت استناد و پیگیری دارد.