Effect of Pre- and Post-Heat Treatment on Severely Plastic Deformed Low-Carbon Steels
- سال انتشار: 1399
- محل انتشار: اولین کنفرانس بین المللی و چهارمین کنفراس ملی مهندسی مواد، متالورژی و معدن
- کد COI اختصاصی: MCONF04_048
- زبان مقاله: انگلیسی
- تعداد مشاهده: 422
نویسندگان
Graduate Student, Department of Materials Science and Engineering, Sharif University of Technology, Azadi Ave., Tehran, P.O. Box: ۱۱۳۶۵-۹۴۶۶, Iran, and Department of Mechanical Engineering, The University of Hong Kong, Hong Kong SAR, China
Ph.D. Candidate, Department of Materials Science and Engineering, Sharif University of Technology, Azadi Ave., Tehran, P.O. Box: ۱۱۳۶۵-۹۴۶۶, Iran
Full Professor, Department of Materials Science and Engineering, Sharif University of Technology, Azadi Ave., Tehran, P.O. Box: ۱۱۳۶۵-۹۴۶۶, Iran
چکیده
Severe plastic deformation (SPD) is a top-down process for fabrication of nanostructures through which a con siderable increase in the materials strength is achieved. However, some drawbacks like low ductility and decreased formability have limited its capabilities. A solution to such disadvantagesis implementation of suitable heat treatment procedures in order to improve the materials formability while preserving or even enhancing their strength. In this work, low-carbon steel sheets were processed via SPD to the strain of ۱.۱۶. Samples were subjected to heat treatment before and afterSPD. Two temperatures in the range of inter-critical (۸۵۰ °C) and upper-critical (۱۰۵۰ °C) annealing were selected for conventional annealing of the sheets followed by water-quenching. Microstructureof samples was characterized by optical microscopy, and their mechanical behavior was investigated via tensile and Vickers hardness tests. It is revealed that both heat treatment procedures could improve the ductility and formability of SPDed samples, as well as their ultimate tensile strength (UTS). Although post-heat treatment typically improved the samples ductility and workhardenability, pre-heat treatment could lead to significant enhancement in their UTS. A balanced improvement in mechanical properties was concluded for the sample subjected to pre-heat treatment at ۸۵۰ °C. In this sample, UTS increased about ۷۸% and ۳۸% in comparison with that of as-received and SPDed samples, respectively, while its ductility was marginally increased in comparison to thelatter. The observations would be justified by considering the microstructure modification, e.g., decrease in grain size, increase in high-angle grain boundaries, and elimination of Widmanstatten structure.کلیدواژه ها
Extra-low carbon steel, Severe plastic deformation, Heat treatment, Work hardenability, Strength improvement, Microstructureمقالات مرتبط جدید
- مروری بر کانسار بوکسیت آق بلاغ علمدار، استان آذربایجان شرقی، شمال غرب ایران
- شبیه سازی جریان غیر دارسی و انتقال حرارت جابه جایی و هدایت در محیط متخلخل با رویکرد مقیاس حفره
- مقایسه روش استخراج جبهه کار طولانی با روش استخراج جبهه کار طولانی اصلاح شده در لایه های پرشیب
- بیولیچینگ مس با استفاده از باکتری های مزوفیل و ترموفیل معتدل و مطلق
- عوامل فرایندی موثر بر مصرف گلوله آسیاهای اولیه تغلیظ ۱ مجتمع مس سرچشمه
اطلاعات بیشتر در مورد COI
COI مخفف عبارت CIVILICA Object Identifier به معنی شناسه سیویلیکا برای اسناد است. COI کدی است که مطابق محل انتشار، به مقالات کنفرانسها و ژورنالهای داخل کشور به هنگام نمایه سازی بر روی پایگاه استنادی سیویلیکا اختصاص می یابد.
کد COI به مفهوم کد ملی اسناد نمایه شده در سیویلیکا است و کدی یکتا و ثابت است و به همین دلیل همواره قابلیت استناد و پیگیری دارد.