CENTRIFUGE MODELING OF BURIED PIPELINES RESPONSE DUE TO REVERSE FAULTING

سال انتشار: 1390
محل انتشار: ششمین کنفرانس بین المللی زلزله شناسی و مهندسی زلزله
کد COI اختصاصی: SEE06_399
زبان مقاله: انگلیسی
تعداد مشاهده: 2080

نویسندگان

Assistant Professor, Dept. of Soil Mechanics and Foundation Engineering of School of Civil Engineering, Univ. of Tehran, Tehran, Iran

m Moradi

Assistant Professor, Dept. of Soil Mechanics and Foundation Engineering of School of Civil Engineering, Univ. of Tehran, Tehran, Iran

m Rojhani

Ph D Candidate, Dept. of Soil Mechanics and Foundation Engineering of School of Civil Engineering,Univ. of Tehran, Tehran, Iran

s Takada

Adjunct Professor, Dept. of Soil Mechanics and Foundation Engineering of School of Civil Engineering, Univ. of Tehran, Tehran, Iran

چکیده

Buried pipelines are commonly used to transport water, gas and oil. They are classified as lifelines as they carry materials essential to the support of human life. Due to the importance of lifelines survivability, it is of prime importance to study their threats to mitigate damages. Permanent ground deformation (PGD) such as fault crossing and lateral spreading are some of the most important threats for pipelines. Especially, localized PGD or faulting is a severe hazard for them. Many analytical, numerical and statistical researches have been done since almost four decade ago, but their results must be evaluated and verified by records of field case histories. As well-documented field case histories are quite limited, physical modeling can be used for verification. Physical modeling includes 1g modeling (full-scale or near full-scale) and centrifuge modeling. Centrifuge modeling is somehow preferred to 1g modeling for its accuracy, validity and expense point of view, especially for pipeline modeling with very long effective unanchored length. This study focuses on behavior and response of buried continuous pipelines subjected to reverse faulting using centrifuge modeling technique. In this technical paper laboratory equipments, modeling setup and procedure and split-box container are demonstrated. Especially, physical characteristics of the university of Tehran centrifuge are described. Finally the recorded strains induced in model pipelines are presented

کلیدواژه ها

Centrifuge Modeling, Faulting, Lifelines, Pipeline, Earthquake

مقالات مرتبط جدید

اطلاعات بیشتر در مورد COI

COI مخفف عبارت CIVILICA Object Identifier به معنی شناسه سیویلیکا برای اسناد است. COI کدی است که مطابق محل انتشار، به مقالات کنفرانسها و ژورنالهای داخل کشور به هنگام نمایه سازی بر روی پایگاه استنادی سیویلیکا اختصاص می یابد.

کد COI به مفهوم کد ملی اسناد نمایه شده در سیویلیکا است و کدی یکتا و ثابت است و به همین دلیل همواره قابلیت استناد و پیگیری دارد.