Application of Linear and Nonlinear Profile Modification on Spur Gears Vibration

  • سال انتشار: 1399
  • محل انتشار: بیست و هشتمین کنفرانس سالانه بین المللی انجمن مهندسان مکانیک ایران
  • کد COI اختصاصی: ISME28_467
  • زبان مقاله: انگلیسی
  • تعداد مشاهده: 494
دانلود فایل این مقاله

نویسندگان

Ebrahim Fatemi Haghighi

Department of Mechanical Engineering, Bahonar University of Kerman, Kerman, Iran;Department of Mechanical Engineering, Isfahan University of Technology, Isfahan, Iran

Farhad S. Samani

Department of Mechanical Engineering, Bahonar University of Kerman, Kerman, Iran;

Mahdi Habibian

Department of Mechanical Engineering, Shiraz University, Shiraz, Iran;

چکیده

In this paper, vibration of four spur gears with different modules and tip diameters in three modes of profile modification without and with linear and parabolic modification are compared. The optimization method considers different regimes, in which the objective function can be the static transmission error. The procedure finds the optimal profile modification that reduces the vibrations over a wide range of operating conditions. A new method for finding the enveloping profiles for a generic tool is proposed. A minimum number of parameters needed to describe the profile in the presence of tip and root reliefs are used. A reference structured grid is defined on the tooth, then refinement criteria are applied to obtain accurate solutions in terms of tooth deflection, contact pressure and fillet stress. Combining several analyses within a mesh cycle, information about the Static Transmission Error (STE) is provided. The whole procedure has been implemented in a software called helical pair . In this paper, by using the helical pair software, the STE changes graph was plotted based on the dimensionless time variations and the results of the peak to peak static transmission error (FPPS) calculated. By comparison FPPS of four case studies in three modes without, linear and parabolic modification. It was observed that in each case study, the lowest vibrations were related to the linear modes and after that to the parabolic mode and finally without the indentation correction.

کلیدواژه ها

Tip and Root Relief, Static Transmission Error, Spur Gear, Profile Modification.

مقالات مرتبط جدید

اطلاعات بیشتر در مورد COI

COI مخفف عبارت CIVILICA Object Identifier به معنی شناسه سیویلیکا برای اسناد است. COI کدی است که مطابق محل انتشار، به مقالات کنفرانسها و ژورنالهای داخل کشور به هنگام نمایه سازی بر روی پایگاه استنادی سیویلیکا اختصاص می یابد.

کد COI به مفهوم کد ملی اسناد نمایه شده در سیویلیکا است و کدی یکتا و ثابت است و به همین دلیل همواره قابلیت استناد و پیگیری دارد.