Investigation of mechanical and micro structural properties of ST14 steel sheet joints by friction stir welding process

  • سال انتشار: 1399
  • محل انتشار: بیست و هشتمین کنفرانس سالانه بین المللی انجمن مهندسان مکانیک ایران
  • کد COI اختصاصی: ISME28_341
  • زبان مقاله: انگلیسی
  • تعداد مشاهده: 534
دانلود فایل این مقاله

نویسندگان

Mahmoud Afshari

PhD Student, Mechanical Engineering, Maleke Ashtar university of technology, Tehran, Iran,

Hossein Norozi Foroushani

MSc, Welding Engineering, Amir Kabir university of technology/ Department of Mechanical Engineering, Tehran, Iran,

Ehsan Salahshour Rad

MSc, Materials Engineering, Maleke Ashtar university of technology, Tehran, Iran,

Iraj Sattari Far

Associate Professor, Amir Kabir university of technology/Department of Mechanical Engineering, Tehran, Iran,

چکیده

High strength and ductility are some of the reasons that make ST14 steel one of the most widely used steels in the automotive and aerospace industries. Friction stir welding is one of the new methods of solid -state welding that is proposed as a method with desirable mechanical properties.In this study, mechanical and microstructural properties of 1.5mm thick ST14 steel sheets were investigated in the friction stir welding process. The results of the tensile test showed that the welded specimen with rotational speed of 800 rpm and linear motion speed of 80 mm/min had the highest tensile strength of 305 MPa and failure occurred from the base metal. In addition, the results of the metallographic test showed that the sample with 1000 rpm rotational speed and 50 mm/min linear motion speed had the highest heat input to the piece, and therefore the tungsten carbide particles were separated from the instrument and entered the stirred zone. Also the results of micro hardness test showed that in the welded specimen with rotational speed of 1000 rpm and linear motion speed of 50 mm/min, the hardness increased to 115 ± 1 HV in the stirred zone, which is higher than the hardness of other samples in the same region. It can be claimed that tungsten carbide particles are present in this area.

کلیدواژه ها

Friction Stir Welding, ST14 steel, microstructure, tensile strength, hardness

مقالات مرتبط جدید

اطلاعات بیشتر در مورد COI

COI مخفف عبارت CIVILICA Object Identifier به معنی شناسه سیویلیکا برای اسناد است. COI کدی است که مطابق محل انتشار، به مقالات کنفرانسها و ژورنالهای داخل کشور به هنگام نمایه سازی بر روی پایگاه استنادی سیویلیکا اختصاص می یابد.

کد COI به مفهوم کد ملی اسناد نمایه شده در سیویلیکا است و کدی یکتا و ثابت است و به همین دلیل همواره قابلیت استناد و پیگیری دارد.