The Effect of Thermal Spray Parameters on the Tensile and Temperature of the Coated Equipment

  • سال انتشار: 1398
  • محل انتشار: کنفرانس دو سالانه بین المللی مکانیک جامدات تجربی
  • کد COI اختصاصی: WMECH05_090
  • زبان مقاله: انگلیسی
  • تعداد مشاهده: 401
دانلود فایل این مقاله

نویسندگان

M Baran Poor

Ph.D. Student, Department of Mechanical Engineering, Hakem Sabzevary University, Sabzevar, Iran

M Mohammadi

Assistant Professor Department of Mechanical Engineering, Vali-e-Asr University of Rafsanjan, Rafsanjan, Iran

چکیده

In this study, HVOF thermal spray method is used to increase the strength of structures against crack growth and defeat using stelait6 powder. The effects of spraying angle, distance of spraying and speed of spray gun are investigated. The samples are prepared based on the ASTM 1000 standard and according the condition of spraying machine. The coating process performed according to standard ASTM C66 on samples of stainless steel 304. It is seen that thermal residual stresses due to the thermal spraying process results in delamination of surface coat and the maximum fracture force is less than without coat specimens. Also, increasing the spraying angle leads to decreasing the particle deposition while increasing the distance of spay reduces the temperature of specimens. In addition, particle deposition on the surface reduces due to the increasing the speed of spray gun.

کلیدواژه ها

Thermal spray, ASTM C66, Stelite6, HVOF, Porous structure

مقالات مرتبط جدید

اطلاعات بیشتر در مورد COI

COI مخفف عبارت CIVILICA Object Identifier به معنی شناسه سیویلیکا برای اسناد است. COI کدی است که مطابق محل انتشار، به مقالات کنفرانسها و ژورنالهای داخل کشور به هنگام نمایه سازی بر روی پایگاه استنادی سیویلیکا اختصاص می یابد.

کد COI به مفهوم کد ملی اسناد نمایه شده در سیویلیکا است و کدی یکتا و ثابت است و به همین دلیل همواره قابلیت استناد و پیگیری دارد.