Experimental Investigation of Oxidation Rate of Thermal Barrier Coating for a Gas Turbine Combustion Chamber
- سال انتشار: 1398
- محل انتشار: کنفرانس دو سالانه بین المللی مکانیک جامدات تجربی
- کد COI اختصاصی: WMECH05_079
- زبان مقاله: انگلیسی
- تعداد مشاهده: 469
نویسندگان
Senior R&D Engineer, Turbotec Company, Tehran, Iran.
Senior R&D Engineer, Turbotec Company, Tehran, Iran.
Senior R&D Engineer, Turbotec Company, Tehran, Iran.
R&D Engineer, Turbotec Company, Tehran, Iran
R&D Engineer, Turbotec Company, Tehran, Iran
چکیده
Materials used in gas turbines must be capable of operating in hot gas environments. Only an appropriate coating system can supply protection for hot section components. The demands for increasing engine performance in higher operating temperatures, extended component life, and lower emissions continued to provide the driving force for the development of thermal barrier coating technology. The present research studies the oxidation behavior of the TBC system deposited on the combustion chamber of a gas turbine. This paper focuses on the TGO scale oxidation kinetic which its results are necessary for the life assessment model. TBC, including approximately 0.35 mm yttria partially stabilized zirconia top coat (YSZ) and about 0.2 mm NiCoCrAlY bond coat, is deposited by air plasma spraying (APS). Then TGO growth rate of the coatings is evaluated as a function of time and temperature under isothermal oxidation condition at 900°C and 1150°C up to 1000h. Thickness and phase analysis of the coating and TGO are investigated by optical microscopy, scanning electron microscopy (SEM) and energy dispersive spectroscopy (EDS).کلیدواژه ها
Gas Turbine, Combustion Chamber, Oxidation, Thermal Barrier Coating (TBC), Thermally Grown Oxide (TGO)مقالات مرتبط جدید
- توسعه مبدل حرارتی داخلی ( IHX ) از طریق تغییر فرآیند ساخت و تولید لوله های گاز کولر در صنعت خودروسازی
- بهبودعملکرد سیکل تبرید تراکمی با تغییر فرآیند ساخت مبدل SLHX از آرایش مماسی به هم مرکز
- بررسی تاثیر لایه میانی روی در اتصال غیر مشابه آلیاژ پایه منیزیم AZ۳۱ و آلومینیوم ۶۰۶۱ به روش جوشکاری اصطکاکی اغتشاشی نقطهای
- بررسی تجربی سوراخکاری کامپوزیتهای پلیمری: مقایسه جوت و شیشه
- سیستم هوشمند پایش وضعیت بلبرینگ با استفاده از طیفنگاره صوتی جهت طبقهبندی و تشخیص خطای بلبرینگ ها
اطلاعات بیشتر در مورد COI
COI مخفف عبارت CIVILICA Object Identifier به معنی شناسه سیویلیکا برای اسناد است. COI کدی است که مطابق محل انتشار، به مقالات کنفرانسها و ژورنالهای داخل کشور به هنگام نمایه سازی بر روی پایگاه استنادی سیویلیکا اختصاص می یابد.
کد COI به مفهوم کد ملی اسناد نمایه شده در سیویلیکا است و کدی یکتا و ثابت است و به همین دلیل همواره قابلیت استناد و پیگیری دارد.