Vibration Analysis of Magneto-Electro-Elastic Timoshenko Micro Beam Using Surface Stress Effect and Modified Strain Gradient Theory under Moving Nano-Particle
محل انتشار: فصلنامه مکانیک جامد، دوره: 10، شماره: 1
سال انتشار: 1397
نوع سند: مقاله ژورنالی
زبان: انگلیسی
مشاهده: 253
فایل این مقاله در 22 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
JR_JSMA-10-1_001
تاریخ نمایه سازی: 12 اسفند 1398
چکیده مقاله:
In this article, the free vibration analysis of magneto-electro-elastic (MEE) Timoshenko micro beam model based on surface stress effect and modified strain gradient theory (MSGT) under moving nano-particle is presented. The governing equations of motion using Hamilton’s principle are derived and these equations are solved using differential quadrature method (DQM). The effects of dimensionless electric potential, dimensionless magnetic parameter, material length scale parameter, external electric voltage, external magnetic parameter, slenderness ratio, temperature change, surface stress effect, two parameters of elastic foundation on the dimensionless natural frequency are investigated. It is shown that the effect of electric potential and magnetic parameter simultaneously increases the dimensionless natural frequency. On the other hands, with considering two parameters, the stiffness of MEE Timoshenko micro beam model increases. It can be seen that the dimensionless natural frequency of micro structure increases by MSGT more than modified couple stress theory (MCST) and classical theory (CT). It is found that by increasing the mass of nano-particle, the dimensionless natural frequency of system decreases. The results of this study can be employed to design and manufacture micro-devices to prevent resonance phenomenon or as a sensor to control the dynamic stability of micro structures.
کلیدواژه ها:
Vibration analysis ، Moving nano-particle ، Timoshenko micro beam model ، Surface stress effect ، MSGT ، Magneto-electro-elastic loadings ، DQM
نویسندگان
M Mohammadimehr
Department of Solid Mechanics, Faculty of Mechanical Engineering, University of Kashan, Kashan, Iran
H Mohammadi Hooyeh
Department of Solid Mechanics, Faculty of Mechanical Engineering, University of Kashan, Kashan, Iran
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :