N Brinis - Engineering Sciences and Advanced Materials Laboratory (ISMA), Laghrour-Abbes University of Khenchela, Algeria
B Regaiguia - Engineering Sciences and Advanced Materials Laboratory (ISMA), Laghrour-Abbes University of Khenchela, Algeria ---Metallurgy and Engineering Materials, Badji-Mokhtar University of Annaba, Algeria
O Chahaoui - Engineering Sciences and Advanced Materials Laboratory (ISMA), Laghrour-Abbes University of Khenchela, Algeria
N Maatougui - National School of Mines and Metallurgy-Annaba, Algeria

The comprehension of the anisotropy impacts on mechanical properties of the rolled steel sheets was investigated using a non-quadratic anisotropic yield function. In this study, experimental and modelling determination regarding the behaviour of an industrial rolled sheet for a ferritic stainless low-carbon steel were carried out. The parameters of the associated yield equation, derived from the three orthotropic yield functions proposed by Hill48, Yld96 and Yld2000-2d, were determined. Predictions and the evolution of normalized yield stress and normalized Lankford parameters (plastic strain ratio) obtained by the presented investigative are considered. The forecasts given by the YLD2000-2d criterion are consistent with that of the experience. In order to describe the path of strain behavior, the isotropic hardening function is described using the following four empirical standard formulae based on: Hollomon, Ludwick, Swift and Voce law. More accurately, the anisotropy coefficients of three yield functions are represented as a function of the longitudinal equivalent plastic strain.

Constitutive model, Sheet Metal Forming, Anisotropy evolution, Orthotropic yield criterion, Isotropic hardening function