Evaluation of surface appearance parameters in automotive recoating: The effect of basecoat and clearcoat thickness
سال انتشار: 1398
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 369
نسخه کامل این مقاله ارائه نشده است و در دسترس نمی باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
ICAPC06_029
تاریخ نمایه سازی: 17 دی 1398
چکیده مقاله:
The effect of clear coat and base coat thickness on the surface appearance parameters of Distinctness of Image (DOI) and waviness of the surface (LW, SW) have been studied. Results show that the optimum thickness of the base coat layer is 20 μm (confined limit of thickness), that any deviation from which, would adversely impact all appearance parameters whilst the effect of clear coat thickness could be varied. Although increase in clear coat thickness has positively contributed to a better performance in LW and DOI experiments, its influence on the SW results was slightly undesirable.
کلیدواژه ها:
نویسندگان
Mohammad Javad Shahla
Engineering Department, Tehran-West branch of Azad Islamic University
Setareh Qashqaei
Art and architecture Department, Tehran-Central branch of Azad Islamic University