Electrocoagulation Modeling in Gas Refineries Oily Wastewater by Response Surface Methodology for COD reduction
- سال انتشار: 1398
- محل انتشار: دومین کنفرانس ملی پیشرفت های اخیر در مهندسی و علوم نوین
- کد COI اختصاصی: DESCONF02_020
- زبان مقاله: انگلیسی
- تعداد مشاهده: 673
نویسندگان
Student of Chemical Engineering (M.Sc.) in Department of Chemistry, Shiraz Branch, Islamic Azad University, Shiraz, Iran
Professor of Chemical Engineering in Department of Chemistry, Shiraz Branch, Islamic Azad University, Shiraz, Iran (Thesis Advisor)
Professor of Chemical engineering in Department of Chemistry , University of Guilan, Rasht, Iran (Consulting Advisor)
چکیده
The effluents’ COD of an oil and gas refinery is quite high (~16500 mg/L) - so is their turbidity - and the demulsifier which is presently used for oil-in-water emulsion breakdown requires to be used in large quantities and is of poor performance. Consequently, the treated effluents do not meet the local environmental standards for being discharged into the sea and an alternative replacement for treatment seems to be inevitable. In this research the possibility of electrocoagulation as a replacement was investigated. For this approach the Design of Experiments (DoE) was selected based on the Central Composite Design (CCD) and was developed by using the Response Surface Methodology (RSM). Three process variables that have a major role in the electrocoagulation process were found to be: pH of the effluent (2-9), current density (20-50 mA/cm2), and duration of operation (10-120 min). The removal of chemical oxygen demand (COD) and turbidity were selected as the response process. Based on analysis of variance (ANOVA) results, the first-order effects of all three variables and their second-order effects showed to be greatest on COD and turbidity removal. The maximum removal of COD with an efficiency of 93% and turbidity of 94% was observed both under the conditions of pH of 5.5-7, current density of 50 mA/cm2 in operation duration of 65 minutes. Also, the amount of turbidity removed in this range was 94%.کلیدواژه ها
Oily Wastewater, Electrocoagulation, Response Surface Methodologyمقالات مرتبط جدید
- Resource Optimization in Large Language Model Deployment Using Reinforcement Learning and Adaptive Software Engineering
- کاربرد یادگیری ماشین در پیشبینی خطاهای نرم افزاری در مراحل اولیه توسعه سیستم های پیچیده
- A review of the application of silver nanoparticles in improving the performance of ultrathin silicon solar cells
- نگرشی برنانو و نقش آن در تصفیه آب در نیروگاه های برق
- The Biomechanical Effect of Knee Flexion Angles on Squat Lifting with a Flat Back Position
اطلاعات بیشتر در مورد COI
COI مخفف عبارت CIVILICA Object Identifier به معنی شناسه سیویلیکا برای اسناد است. COI کدی است که مطابق محل انتشار، به مقالات کنفرانسها و ژورنالهای داخل کشور به هنگام نمایه سازی بر روی پایگاه استنادی سیویلیکا اختصاص می یابد.
کد COI به مفهوم کد ملی اسناد نمایه شده در سیویلیکا است و کدی یکتا و ثابت است و به همین دلیل همواره قابلیت استناد و پیگیری دارد.