A 3D Numerical and Empirical Study on the Effects of Injection Pressure and Temperature on the Quality of Produced Mold
محل انتشار: ماهنامه بین المللی مهندسی، دوره: 31، شماره: 3
سال انتشار: 1396
نوع سند: مقاله ژورنالی
زبان: انگلیسی
مشاهده: 330
فایل این مقاله در 8 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
JR_IJE-31-3_012
تاریخ نمایه سازی: 10 آذر 1398
چکیده مقاله:
Plastic injection is a method in which, with using an extruder in granules, plastic is injected in a hole with high pressure. Because of meeting the two flow fronts in this process welding line will be made. Along the welding line the strength of produced part is low; therefore the position of welding line and its clarity are very important. In this paper, analyzes have been done with Fluent and Mold Flow softwares. In addition, verification of these analyzes have been done with practical experiments in order to study the effect of injection pressure and temperature on the welding line and its clarity. The materials used in these experiments are ABS and PP. Results show that applying different injection pressure and temperatures affects the strength of the produced part.
کلیدواژه ها:
نویسندگان
Siamak Mazdak
mechanical Engineering, Tafresh University
zahra baniamerian
Mecanical Engineering, Tafresh University
Siavash Rahimi
mechanical Engineering, Tafresh University
Ebrahim Sharifi Tashnizi
mechanical Engineering, Tafresh University