Toward an Improvement of Natural Gas-diesel Dual Fuel Engine Operation at Part Load Condition by Detail CFD Simulation

سال انتشار: 1397
نوع سند: مقاله ژورنالی
زبان: انگلیسی
مشاهده: 298

فایل این مقاله در 6 صفحه با فرمت PDF قابل دریافت می باشد

استخراج به نرم افزارهای پژوهشی:

لینک ثابت به این مقاله:

شناسه ملی سند علمی:

JR_IJE-31-7_011

تاریخ نمایه سازی: 10 آذر 1398

چکیده مقاله:

Natural gas-diesel dual fuel combustion is a beneficial strategy for achieving high efficient and low emissions operation in compression ignition engines, especially in genset application heavy duty diesel engine at rated power. This study aims to investigate a dual fuel engine performance and emissions using premixed natural gas and early direct injection of diesel fuel. Due to the different reactivities of natural gas and diesel fuels, the mentioned dual fuel combustion is based on reactivity controlled compression igniton (RCCI) which is introduced whitin the cylinder. A six-cylinder direct injection (DI) diesel engine was properly modified to run on dual-fuel mode. Based on experimental study, comparative results are given for various operating modes; conventional diesel mode, convential dual-fuel mode, and RCCI mode; revealing the effect of combustion mode on performance and emission characteristics in a compression ignition engine. The results show that the conventional dual fuel combustion reduces nitrogen oxides (NOx) emissions but suffers from higher carbon monoxide (CO) and unburned hydrocarbon (HC) emissions in compared to conventional diesel mode at part load condition. Results of detailed assessment of different dual fuel modes with CFD model coupled with chemical kinetic mechanism reaveled that RCCI strategy led to higher combustion efficiency as well as lower HC and CO emissions compared to conventional dual fuel combustion at part load condition.

کلیدواژه ها:

Reactivity Controlled Compression Igniton Combustion ، Natural gas ، Diesel ، CFD Simulation Coupled with Chemical Kinetic

نویسندگان

Mufaddel Dahodwala

Mechainical Engineering, FEV North America Inc.

S.M. Agha Mirsalim

Mechainical Engineering, Amirkabir University

Samad Jafarmadar

Mechanical Engineering, Urmia University

S. Khalil Arya

Mechainical Engineering, Urmia University