Investigation of Carbon Fiber Reinforced Polymer Composite Welding with a New Tool in Friction Stir Welding Method
- سال انتشار: 1398
- محل انتشار: ماهنامه بین المللی مهندسی، دوره: 32، شماره: 6
- کد COI اختصاصی: JR_IJE-32-6_009
- زبان مقاله: انگلیسی
- تعداد مشاهده: 447
نویسندگان
Department of Mechanical Engineering Manufacturing, Parsian Nonprofit Higher Education Center of Qazvin, Qazvin, Iran
Department of Mechanical Engineering, Karaj Branch, Islamic Azad University, Karaj, Iran
Department of Materials Engineering, Imam Khomeini International University of Qazvin, Qazvin, Iran
School of Materials Engineering, Materials and Energy Research Center, Karaj, Iran
چکیده
Application of thermoplastic materials has increased dramatically in recent decades due to its recyclability, low density, resistance to chemical changes. The friction stir welding process is one of the new methods of solid state welding, which has recently undergone a significant improvement. In this research, using a new tool Made of plain carbon steel st37 in friction stir welding and low cost turning machine, composite sheets of thermoplastic polymer base have 12% continuous carbon fiber in the form of buttocks with two rotational speeds of 250 and 355 rpm and two advance speeds of 5/6 and 9 mm/min Optical microscope images (OM) showed the complete connection of materials. Increasing the inlet temperature resulted in the formation and growth of cavities and converting them into tunnel cavities. In general, the parameters affecting the connection quality in this study included the main shoulder diameter and rotational speed, so that, based on the results of scanning electron microscopy (SEM), the increase in rotational speed resulted in the grinding of continuous carbon fibers and thus increased tensile strength. The results of the tensile test showed that the failure of the samples is due to microstructural changes in the HAZ, in the joint zone of the welding zone and the base materials. According to the results, it can be said that using this new tool in the friction stir welding method, because of the reduction of rotational speed compared to previous studies and the lack of use of a multi-axial milling machine, can save energy.کلیدواژه ها
polymer composite, carbon fiber, Friction Stir Welding, New Tools, tensile strengthاطلاعات بیشتر در مورد COI
COI مخفف عبارت CIVILICA Object Identifier به معنی شناسه سیویلیکا برای اسناد است. COI کدی است که مطابق محل انتشار، به مقالات کنفرانسها و ژورنالهای داخل کشور به هنگام نمایه سازی بر روی پایگاه استنادی سیویلیکا اختصاص می یابد.
کد COI به مفهوم کد ملی اسناد نمایه شده در سیویلیکا است و کدی یکتا و ثابت است و به همین دلیل همواره قابلیت استناد و پیگیری دارد.