The effect of electric potential distribution on torsion of piezoelectric rods
- سال انتشار: 1389
- محل انتشار: هجدهمین کنفرانس سالانه مهندسی مکانیک
- کد COI اختصاصی: ISME18_429
- زبان مقاله: انگلیسی
- تعداد مشاهده: 1592
نویسندگان
Mechanical Engineering Department, AmirKabir University of Technology
School of Mechanical Engineering, University of Tehran
School of Mechanical Engineering, University of Tehran
School of Mechanical Engineering, University of Tehran
چکیده
This paper considers deformation of a prismatic piezoelectric rod under pure torsion and various boundary conditions. The rod is sufficiently far from torsional load and made up of ADP (Ammonium Dehydrogen Phosphate) or PZT (Lead Zirconate Titanate). The analysis is independent of any assumption such as the assumptions of Saint Venant theory of torsion and how electric potential distributes through the cross section.In previous investigations, torsion of piezoelectric rods has already been discussed based on some simplifications such as linear distribution of electric potential and the Saint Venant assumptions of torsional deformation. In this paper, three dimensional theory of elasticity is applied to obtain exact distributions of electric potential; stress and strain of a piezoelectric rod without any simplification The exact solution of torsion, for any arbitrary cross section is obtained. This is analytically solved for a rectangular cross section rod of ADP and PZT. Additionally, a threedimensional finite element analysis is applied and the results are compared with the analytical solution. It is shown that the Saint Venant theory of torsion is still valid, while the assumption of linearity in electric potential distribution is invalid and leads to remarkable inaccuracy in stress and strain distributions.کلیدواژه ها
Torsion, Piezoelectric, Electric Potential Distribution, Analytical Solution, ADP, PZTمقالات مرتبط جدید
- توسعه مبدل حرارتی داخلی ( IHX ) از طریق تغییر فرآیند ساخت و تولید لوله های گاز کولر در صنعت خودروسازی
- بهبودعملکرد سیکل تبرید تراکمی با تغییر فرآیند ساخت مبدل SLHX از آرایش مماسی به هم مرکز
- بررسی تاثیر لایه میانی روی در اتصال غیر مشابه آلیاژ پایه منیزیم AZ۳۱ و آلومینیوم ۶۰۶۱ به روش جوشکاری اصطکاکی اغتشاشی نقطهای
- بررسی تجربی سوراخکاری کامپوزیتهای پلیمری: مقایسه جوت و شیشه
- سیستم هوشمند پایش وضعیت بلبرینگ با استفاده از طیفنگاره صوتی جهت طبقهبندی و تشخیص خطای بلبرینگ ها
اطلاعات بیشتر در مورد COI
COI مخفف عبارت CIVILICA Object Identifier به معنی شناسه سیویلیکا برای اسناد است. COI کدی است که مطابق محل انتشار، به مقالات کنفرانسها و ژورنالهای داخل کشور به هنگام نمایه سازی بر روی پایگاه استنادی سیویلیکا اختصاص می یابد.
کد COI به مفهوم کد ملی اسناد نمایه شده در سیویلیکا است و کدی یکتا و ثابت است و به همین دلیل همواره قابلیت استناد و پیگیری دارد.