Design of a gas to gas plate-fin heat exchanger with offset strip fins
- سال انتشار: 1389
- محل انتشار: دومین همایش بین المللی مبدلهای گرمایی در صنایع نفت و انرژی
- کد COI اختصاصی: MOBADDEL02_036
- زبان مقاله: انگلیسی
- تعداد مشاهده: 2850
نویسندگان
School of Mechanical Engineering, Iran University of Science and Technology
School of Mechanical Engineering, Iran University of Science and Technology
چکیده
In this study a Plate-Fin Heat Exchanger (PFHE) is considered for designing. The methodology is based on a thermo-hydraulic model that represents the relationship between pressure drop, heat transfer coefficient and heat exchanger volume. Although there are some studies in designing of PFHEs, no theoretical studies have been done by the focus on gas-gas types with offset-strip fins. Therefore the motivation of this study is design of a gas-gas PFHE with constraints on the allowable pressure drop. The designing program aims at sizing the heat exchanger while the geometries of the fins are fixed and are taken from an available database and three dimensions of heat exchanger are considered for the sizing.The task of sizing is a design process, so we have developed a full analysis of PFHEs including heat transfer and pressure drop equations to obtain the structure sizes. Also a perfect analysis for surface geometrical characteristic has been developed for this kind of heat exchanger. Finally, the obtained dimensions are compared to those presented in the literature and it is shown that with pressure drop constraints the difference between the volume of designed PFHE and the heat exchangers in the literature is lower than 10% and negligible.کلیدواژه ها
plate-fin HE, designing, heat transfer, volume, pressure drop, offsetstrip finsمقالات مرتبط جدید
- توسعه مبدل حرارتی داخلی ( IHX ) از طریق تغییر فرآیند ساخت و تولید لوله های گاز کولر در صنعت خودروسازی
- بهبودعملکرد سیکل تبرید تراکمی با تغییر فرآیند ساخت مبدل SLHX از آرایش مماسی به هم مرکز
- بررسی تاثیر لایه میانی روی در اتصال غیر مشابه آلیاژ پایه منیزیم AZ۳۱ و آلومینیوم ۶۰۶۱ به روش جوشکاری اصطکاکی اغتشاشی نقطهای
- بررسی تجربی سوراخکاری کامپوزیتهای پلیمری: مقایسه جوت و شیشه
- سیستم هوشمند پایش وضعیت بلبرینگ با استفاده از طیفنگاره صوتی جهت طبقهبندی و تشخیص خطای بلبرینگ ها
اطلاعات بیشتر در مورد COI
COI مخفف عبارت CIVILICA Object Identifier به معنی شناسه سیویلیکا برای اسناد است. COI کدی است که مطابق محل انتشار، به مقالات کنفرانسها و ژورنالهای داخل کشور به هنگام نمایه سازی بر روی پایگاه استنادی سیویلیکا اختصاص می یابد.
کد COI به مفهوم کد ملی اسناد نمایه شده در سیویلیکا است و کدی یکتا و ثابت است و به همین دلیل همواره قابلیت استناد و پیگیری دارد.