Soroush Kherad - Doctorate Student, Islamic Azad Univ., Tehran South Branch
Mahmood Hosseini - Associate Prof., Int’l Inst. of Earthquake Eng. & Seismology (IIEES)

There are some important buildings which their performance level (PL) should not be lower than immediate occupancy (IO) based on the recent seismic design codes. The most common way for achieving this PL is using seismic isolation technique. However this technique has not been acknowledged worldwide so much, particularly in developing countries, mainly due to the high cost and the relatively large required free space around the building which is not usually acceptable for the buildings’ owners. Another approach for achieving IO PL, proposed in recent years, is using a structural system which can have seesaw motion during an earthquake, and at the same time dissipate a major part of the input energy in its specific dampers or structural fuses, which can be easily replaced after the earthquake. The building with such a system which can be called ‘seesaw building’ needs to have, in addition to the structural fuses, a specific central support and a grid of strong girders at its lowest floor. These additional components add some cost to the costs of the building’s structural system. The aim of this study is comparing the efficiency of common seismic isolation technique with that of the seesaw building, from both seismic performance and construction costs aspects. Special attention has been paid to the near-field earthquake to which the commonisolation systems are weak. For comparing the seismic behaviors of the two systems, responses of the considered counterpart buildings have been obtained by a series of nonlinear time history analysis by using a set of selected far- and nearfield earthquakes. Numerical results show that the seesaw building generally behaves better than isolated buildings, with less lateral displacements, and its cost is relatively lower as well. The only shortcoming of the seesaw building is its very little residual displacement at the end of the earthquake, which necessitates some attempts for bringing it back to the original position.

Repairable building, Structural fuse, nonlinear time history analysis, Near-field earthquake