Multi Objective Optimization of Organic Rankine Cycle Considering Different Working Fluids
- سال انتشار: 1398
- محل انتشار: بیست و چهارمین کنفرانس سالانه بین المللی انجمن مهندسان مکانیک ایران
- کد COI اختصاصی: ISME24_750
- زبان مقاله: انگلیسی
- تعداد مشاهده: 383
نویسندگان
Assistant Professor, Vali-e-Asr University of Rafsanjan, Department of Mechanical Engineering
MSc student, Vali-e-Asr University of Rafsanjan, Department of Mechanical Engineering;
چکیده
An Organic Rankine Cycle for Diesel engine waste heat recovery is modelled and optimized. The design parameters are nominal capacity of diesel engine, diesel operating partial load, evaporator pressure, condenser pressure, refrigerant mass flow rate, turbine isentropic efficiency and pump isentropic efficiency. In addition four refrigerants including R123, R134a, R245fa and R22 are selected and studied as working fluids. Then, the fast and elitist Non-dominated Sorting Genetic Algorithm (NSGA-II) is applied to maximize the thermal efficiency and minimize the total annual cost (sum of investment cost, fuel cost and environmental cost) simultaneously. The results of the optimal design are a set of multiple optimum solutions, called Pareto optimal solutions. The optimization results show that the best working fluid is R123 in both of economical and thermo dynamical view point for a specified value of output power. R245fa, R134a and R22 are placed in the next ranking, respectively. The optimum result of R123 show the 0.01%, 4.39%, and 4.49% improvement for the total annual cost in comparison with R245fa, R22, and R134a, respectively. The above values for efficiency are obtained 1.01%, 12.79% and 10.57%, respectively. Furthermore R123 needs the highest investment cost while the environmental and fuel costs are the lowest.کلیدواژه ها
مقالات مرتبط جدید
- توسعه مبدل حرارتی داخلی ( IHX ) از طریق تغییر فرآیند ساخت و تولید لوله های گاز کولر در صنعت خودروسازی
- بهبودعملکرد سیکل تبرید تراکمی با تغییر فرآیند ساخت مبدل SLHX از آرایش مماسی به هم مرکز
- بررسی تاثیر لایه میانی روی در اتصال غیر مشابه آلیاژ پایه منیزیم AZ۳۱ و آلومینیوم ۶۰۶۱ به روش جوشکاری اصطکاکی اغتشاشی نقطهای
- بررسی تجربی سوراخکاری کامپوزیتهای پلیمری: مقایسه جوت و شیشه
- سیستم هوشمند پایش وضعیت بلبرینگ با استفاده از طیفنگاره صوتی جهت طبقهبندی و تشخیص خطای بلبرینگ ها
اطلاعات بیشتر در مورد COI
COI مخفف عبارت CIVILICA Object Identifier به معنی شناسه سیویلیکا برای اسناد است. COI کدی است که مطابق محل انتشار، به مقالات کنفرانسها و ژورنالهای داخل کشور به هنگام نمایه سازی بر روی پایگاه استنادی سیویلیکا اختصاص می یابد.
کد COI به مفهوم کد ملی اسناد نمایه شده در سیویلیکا است و کدی یکتا و ثابت است و به همین دلیل همواره قابلیت استناد و پیگیری دارد.