Combination of Sliding Mode and Fuzzy Controllers on a Quadrotor Hardware-in-the-Loop Setup
- سال انتشار: 1398
- محل انتشار: بیست و چهارمین کنفرانس سالانه بین المللی انجمن مهندسان مکانیک ایران
- کد COI اختصاصی: ISME24_695
- زبان مقاله: انگلیسی
- تعداد مشاهده: 272
نویسندگان
Mechanical Engineering Department, K. N. Toosi University of Technology, Tehran, Iran.
Mechatronic Mechanisms Laboratory (MML), K. N. Toosi University of Technology, Tehran, Iran
چکیده
A control system which is a combination of the sliding mode and fuzzy controllers is designed and described in this paper to control the attitude and position of a real quadrotor. Because of some uncertainties in the real situations, such as estimation of the thrust forces, geometrical parameters, existence of unknown resisting forces and torques, and nonlinearity of the quadrotor, the classical controllers don t have the ability to eliminate most of the errors. So, two types of controllers that have better response in these situations are proposed. Toward this objective, after the extraction of the dynamic equation of a quadrotor, the performances of these controllers are compared on a hardwarein-the-loop test bed in term of attitude. The experimental results show that the sliding mode control has faster response and the fuzzy control is more accurate to track a desired trajectory. So, here sliding mode and fuzzy control are used to control the attitude and translational position of the quadrotor, respectively. This method is implemented on a test bed to show the possibility of trajectory control with the proposed controller to apply it on a real flying quadrotor. The results show the adequate response of this control strategy to track the desired trajectory in 3D space.کلیدواژه ها
مقالات مرتبط جدید
- تحلیل مکانیزم جدید رابط بین صفحه متحرک و ثابت ربات موازی صفحه ای
- تحلیل عددی کمانش پوسته استوانهای کامپوزیت تحت فشار یکنواخت خارجی با در نظر گرفتن جدایش بین الیه ها و رشد آن با استفاده از روش المان های چسبنده
- تحلیل عددی مخزن استوانه ای جدار نازک به روش متقارن محوری و مقایسه آن با حل دقیق
- بررسی تاثیر نرخ سرد شدن بر سختی و ریز ساختار یک آلیاژ
- مروری بر کامپوزیتهای فلزی؛ ویژگیها و روشهای تولید
اطلاعات بیشتر در مورد COI
COI مخفف عبارت CIVILICA Object Identifier به معنی شناسه سیویلیکا برای اسناد است. COI کدی است که مطابق محل انتشار، به مقالات کنفرانسها و ژورنالهای داخل کشور به هنگام نمایه سازی بر روی پایگاه استنادی سیویلیکا اختصاص می یابد.
کد COI به مفهوم کد ملی اسناد نمایه شده در سیویلیکا است و کدی یکتا و ثابت است و به همین دلیل همواره قابلیت استناد و پیگیری دارد.