Load Calculation and Stress Analysis of a Helicopter Main Rotor Blade in Hover Situation

  • سال انتشار: 1398
  • محل انتشار: بیست و هفتمین کنفرانس سالانه بین المللی انجمن مهندسان مکانیک ایران
  • کد COI اختصاصی: ISME27_613
  • زبان مقاله: انگلیسی
  • تعداد مشاهده: 348
دانلود فایل این مقاله

نویسندگان

S Mohammadi

Assistant professor, Faculty of Engineering, University of Kurdistan

A.R Shahani

Professor, Faculty of Mechanical Engineering, K. N. Toosi University of Technology

چکیده

In structural point of view, a helicopter rotor blade is a cantilever beam which is exposed to different loads during flight. So, the main task of the blade is to tolerate applying stresses in all the loading conditions with minimum weight. In addition, the blade tip displacementshould remain in an acceptable range so that the aerodynamic operation is done well. In other words, for preventing some problems like resonance and flatter, the blade structural stiffness should be large enough. In this article, at the first step, the applied loads on the Bell 205 helicopter main rotor blade in the hover situation will be computed. For obtaining lift distribution along the blade length, the combination of momentum theory and blade element theory was used. After that, pressure distribution on the blade was computed using Aerofoil software and a Matlab code. In the next step, the blade model were created using Abaqus software with all of its detail.Then, the blade stress and deformations are obtained using FEM analysis. Due to the complexity of the model and in order to obtain more accurate results for the stresses, the sub-model technique was used. At the end, the critical point of the blade in structural point of view and the maximum stress in its main load bearing components were obtained.

کلیدواژه ها

numerical analysis, helicopter blade stress analysis, helicopter blade loads, helicopter blade FEM analysis, rotor blade stress

اطلاعات بیشتر در مورد COI

COI مخفف عبارت CIVILICA Object Identifier به معنی شناسه سیویلیکا برای اسناد است. COI کدی است که مطابق محل انتشار، به مقالات کنفرانسها و ژورنالهای داخل کشور به هنگام نمایه سازی بر روی پایگاه استنادی سیویلیکا اختصاص می یابد.

کد COI به مفهوم کد ملی اسناد نمایه شده در سیویلیکا است و کدی یکتا و ثابت است و به همین دلیل همواره قابلیت استناد و پیگیری دارد.