Effect of Solution Conductivity and Surface Tension on Electrospun Polymeric Nanofibers
محل انتشار: دومین کنفرانس نانوساختارها
سال انتشار: 1386
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 2,298
متن کامل این مقاله منتشر نشده است و فقط به صورت چکیده یا چکیده مبسوط در پایگاه موجود می باشد.
توضیح: معمولا کلیه مقالاتی که کمتر از ۵ صفحه باشند در پایگاه سیویلیکا اصل مقاله (فول تکست) محسوب نمی شوند و فقط کاربران عضو بدون کسر اعتبار می توانند فایل آنها را دریافت نمایند.
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
CNS02_095
تاریخ نمایه سازی: 11 اردیبهشت 1389
چکیده مقاله:
Polystyrene fibers were produced by the electrospinning technique. The effects of solution conductivity and surface tension on morphology and average diameter of electrospun fibers were investigated by scanning electron microscopy (SEM). Solutions of 10 and 12 % (w/v) polystyrene in dimethylformamide were prepared. Lithium Chloride and a non-ionic surfactant were used to change the conductivity and surface tension of the solutions respectively. The results indicate that increasing the solution conductivity, eliminates the bead formation and increases the fiber diameters. By reducing the concentration to 10% (w/v) and adding 0.1% LiCl, bead-free thin fibers were produced. Adding 0.1% surfactant reduces the solution surface tension and results in smaller beads
کلیدواژه ها:
نویسندگان
D Fallahi
Polymer Engineering Department, Amirkabir University of Technology
M Rafizadeh
Polymer Engineering Department, Amirkabir University of Technology
N Mohammadi
Polymer Engineering Department, Amirkabir University of Technology
B Vahidi
Electrical Engineering Department, Amirkabir University