Investigation the properties of synthesized copper based nano-composites with TiO_2 particles

سال انتشار: 1397
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 548

فایل این مقاله در 10 صفحه با فرمت PDF قابل دریافت می باشد

استخراج به نرم افزارهای پژوهشی:

لینک ثابت به این مقاله:

شناسه ملی سند علمی:

COMPOSIT06_097

تاریخ نمایه سازی: 31 تیر 1398

چکیده مقاله:

Copper matrix composites reinforced with 〖TiO〗_2 particles are promising materials widely used as contact materials due to their excellent mechanical and physical properties such as good electrical and thermal conductivity and strength at high temperature. In this research, the novel contact material were prepared by in-situ oxidation of Cu-Ti pre alloyed powders. The morphology of milled powders and microstructure of nano-composite specimens were studied by SEM and TEM. To evaluate mechanical alloying progress of Cu and Ti powders mixture and internal oxidation after 〖Cu〗_2 O addition, XRD analysis were carried out. The Physical and mechanical properties results of specimens indicate that the density, specific electrical resistivity, hardness and wear rate values change significantly with amount of TiO2 in Cu matrix. Hardness and specific electrical resistivity increased and density of Cu⁄〖TiO〗_2 nano-composites decreased with increasing amount of 〖TiO〗_2 in Cu matrix.

نویسندگان

A Moghanian

Assistant Professor, Department of Technical And Engineering, Imam Khomeini International University,Qazvin,Iran

M ZohourFazeli

Undergraduate, Department of Technical And Engineering, Imam Khomeini International University,Qazvin,Iran

M Haji Mahdi Tajer,

Undergraduate, Department of Technical And Engineering, Imam Khomeini International University,Qazvin,Iran