A New Method for Automation and Optimization of Pot lines in Aluminum Factories
- سال انتشار: 1397
- محل انتشار: پنجمین کنفرانس بین المللی آلومینیوم ایران
- کد COI اختصاصی: IIAC05_045
- زبان مقاله: انگلیسی
- تعداد مشاهده: 577
نویسندگان
Department of Power electrical Engineering, Malayer University, Malayer, Iran
Iranian Aluminium company, IRALCO, Arak, P.O. Box: ۳۸۱۸۹-۹-۸۱۱۶, Iran
Departrnent of Power electrical Engineering, Energy Management, Shahab Danesh University, Qom, Iran
چکیده
In this paper, the potline section of Iranian Aluminium Company is taken into consideration .From technical, manpower, and economic viewpoint, the voltage fluctuation is considered as one of the main problems in this section. This problem is mostly made as the result of the sludge created at the pot bottom, the drying of the crust surface, the anode effect, and so on.In the old and new lines, these fluctuations are chiefly controlled by non-optimal methods using a lot of manpower in which the voltage fluctuations can create a lot of risks and costs for both the factory and the power network.In this study, due to the consecutive property of the reduction cells, we designed a mechanism that had the ability to pass high current through the pot lines in such a way that it could control the pots in a parallel independent series from each other; and could stabilize all the cells during any fluctuation and after that. In this method, the speed of retaining the normal mode after fluctuation increased and the manpower was used more logically and with more accuracy. Also, a significant improvement was noticed in the consumption of energy, costs, and rate of production as well as a considerable improvement in safety.کلیدواژه ها
potline, voltage fluctuations, reduction cellsمقالات مرتبط جدید
- توسعه مبدل حرارتی داخلی ( IHX ) از طریق تغییر فرآیند ساخت و تولید لوله های گاز کولر در صنعت خودروسازی
- بهبودعملکرد سیکل تبرید تراکمی با تغییر فرآیند ساخت مبدل SLHX از آرایش مماسی به هم مرکز
- بررسی تاثیر لایه میانی روی در اتصال غیر مشابه آلیاژ پایه منیزیم AZ۳۱ و آلومینیوم ۶۰۶۱ به روش جوشکاری اصطکاکی اغتشاشی نقطهای
- بررسی تجربی سوراخکاری کامپوزیتهای پلیمری: مقایسه جوت و شیشه
- سیستم هوشمند پایش وضعیت بلبرینگ با استفاده از طیفنگاره صوتی جهت طبقهبندی و تشخیص خطای بلبرینگ ها
اطلاعات بیشتر در مورد COI
COI مخفف عبارت CIVILICA Object Identifier به معنی شناسه سیویلیکا برای اسناد است. COI کدی است که مطابق محل انتشار، به مقالات کنفرانسها و ژورنالهای داخل کشور به هنگام نمایه سازی بر روی پایگاه استنادی سیویلیکا اختصاص می یابد.
کد COI به مفهوم کد ملی اسناد نمایه شده در سیویلیکا است و کدی یکتا و ثابت است و به همین دلیل همواره قابلیت استناد و پیگیری دارد.