Recovery of Metals from Red Mud Using Mineral Acids
- سال انتشار: 1397
- محل انتشار: پنجمین کنفرانس بین المللی آلومینیوم ایران
- کد COI اختصاصی: IIAC05_040
- زبان مقاله: انگلیسی
- تعداد مشاهده: 645
نویسندگان
Research laboratory of Inorganic Chemical Process Technologies, School of Chemical Engineering, Iran University of Science and Technology, Narmak ۱۶۸۴۶۱۳۱۱۴, Tehran, Iran
Research laboratory of Inorganic Chemical Process Technologies, School of Chemical Engineering, Iran University of Science and Technology, Narmak ۱۶۸۴۶۱۳۱۱۴, Tehran, Iran
Research laboratory of Inorganic Chemical Process Technologies, School of Chemical Engineering, Iran University of Science and Technology, Narmak ۱۶۸۴۶۱۳۱۱۴, Tehran, Iran
چکیده
Red mud is a hazardous waste generated at the end of the Bayer process for alumina production from bauxite. If not managed properly, red mud imposes serious threats to the environment and public health. In most cases, it contains high amounts of iron as well as some amounts of aluminium, titanium, sodium and other valuable metals. Retrieving these valuable elements has attracted the growing interest of the researchers. In this study, the dissolution efficiency and recovery of various metals are investigated using various single and mixed mineral acids. The conditions for dissolution experiments were: temperature of 85 °C, reaction time of 120 minutes, liquid-to-solid ratio of 20 ml/g, and a constant acid concentration of 3 N. The results showed that among different acids and acid mixtures used, 3 N HCl, 3 N HNO3, and 3 N acid mixture of HCl:HNO3 (1:1) containing 3 wt.% of HF exhibit the highest dissolution efficiency of 79.35%, 79.70% and 80.37%, respectively. Finally, the concentration of various metal elements in the leachates obtained from these acids was determined by inductively coupled plasma atomic emission spectroscopy (ICP- AES) analysis. The ICP-AES analyses revealed that the acidic mixture of HCl:HNO3 (1:1) containing 3 wt.% of HF can recover Al, Ca, Ce, Fe, Mg, Na, Sc, Si, Ti, and Zr better than both 3 N HCl and 3 N HNO3.کلیدواژه ها
Red mud, Recovery, Metal, Dissolution, Rare earth elementمقالات مرتبط جدید
- توسعه مبدل حرارتی داخلی ( IHX ) از طریق تغییر فرآیند ساخت و تولید لوله های گاز کولر در صنعت خودروسازی
- بهبودعملکرد سیکل تبرید تراکمی با تغییر فرآیند ساخت مبدل SLHX از آرایش مماسی به هم مرکز
- بررسی تاثیر لایه میانی روی در اتصال غیر مشابه آلیاژ پایه منیزیم AZ۳۱ و آلومینیوم ۶۰۶۱ به روش جوشکاری اصطکاکی اغتشاشی نقطهای
- بررسی تجربی سوراخکاری کامپوزیتهای پلیمری: مقایسه جوت و شیشه
- سیستم هوشمند پایش وضعیت بلبرینگ با استفاده از طیفنگاره صوتی جهت طبقهبندی و تشخیص خطای بلبرینگ ها
اطلاعات بیشتر در مورد COI
COI مخفف عبارت CIVILICA Object Identifier به معنی شناسه سیویلیکا برای اسناد است. COI کدی است که مطابق محل انتشار، به مقالات کنفرانسها و ژورنالهای داخل کشور به هنگام نمایه سازی بر روی پایگاه استنادی سیویلیکا اختصاص می یابد.
کد COI به مفهوم کد ملی اسناد نمایه شده در سیویلیکا است و کدی یکتا و ثابت است و به همین دلیل همواره قابلیت استناد و پیگیری دارد.